NCFI 11-033-InsulStar Optimaxx 1.7 Technical Data Sheet (TDS)
NCFI InsulStar Optimaxx 1.7# HFO Slow/Summer Closed Cell Foam
NCFI InsulStar Optimaxx 1.7# HFO Slow/Summer Closed Cell Foam-Temperature Range Guidelines: 70 degrees and up
11-033 InsulStar®1.7 OPTIMAXX is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam system. This system has been formulated with a highly insulating HFO as the blowing agent. The InsulStar®1.7 OPTIMAXX insulation system is suitable for application on the interior building envelope of Type I, II, III, IV, & V buildings as well as other insulation applications.
| Weight | 453138.41 grams |
If you have purchased the product, you can review it from the order details screen.
Related Products
NCFI 2.0# HFO Closed Cell Fast Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:7719:"
";}}}}}}
11-037 InsulBloc SmartSPF is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBlock SmartSPF insulation system is suitable for application on the exterior or interior side of Type I, Type II, Type III, IV and V building walls as well as other insulation applications.
Cold Weather Foam. Temperature Range Guideline: 10 degrees - 50 degrees F
NCFI 2.0# HFO Closed Cell Regular Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:6532:"";}}}}}}
11-037 InsulBloc SmartSPF is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBlock SmartSPF insulation system is suitable for application on the exterior or interior side of Type I, Type II, Type III, IV and V building walls as well as other insulation applications.
Temperature Range Guideline: 40 degrees - 80 degrees F
NCFI Enduratech 2.8# HFC Roofing Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5492:"";}}}}}}
NCFI Enduratech 2.8# HFC Roofing Foam
NCFI 10-011 is a two component, HFC-245fa blown, all PMDI based spray polyurethane foam system
designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing
system. 10-011 is available in multiple speeds for use in varying temperature conditions. 10-011 complies
with ASTM D7425 and has been formulated to spray at a 2.8 pound density, depending on lift thickness, and
may be used in applications of the EnduraTech™ roofing systems.
NCFI Enduratech 2.8# HFO Roofing Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4433:"
";}}}}}}
NCFI Enduratech 2.8# HFO Roofing Foam
NCFI 10-016 is a two component, HFO blown spray polyurethane foam system designed for use as a
self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing system.
10-016 is available in multiple speeds for use in varying temperature conditions. 10-016 complies with
ASTM D7425 and has been formulated to spray at a 2.8 pound density, depending on lift thickness,
and may be used in applications of the EnduraTech®
roofing systems.
NCFI Enduratech 3.0# HFC Roofing Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5503:"";}}}}}}
NCFI Enduratech 3.0# HFC Roofing Foam
NCFI 10-011 is a two component, HFC-245fa blown, all PMDI based spray polyurethane foam system
designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing
system. 10-011 is available in multiple speeds for use in varying temperature conditions. 10-011 complies
with ASTM D7425 and has been formulated to spray at a 3.0 pound density, depending on lift thickness, and
may be used in applications of the EnduraTech™ roofing systems.
NCFI Enduratech Acrylic Coatings, 55 gal drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3226:"
";}}}}}}
NCFI Enduratech Acrylic Coatings, 55 gal drum
NCFI EnduraTech® Q (70-014) is a durable 100% acrylic elastomeric coating designed specifically for use over
new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.
Installation:
- May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
- All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
- Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
- Apply at temperatures above 50°F.
- Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing temperatures occur.
NCFI Enduratech Acrylic R Coating, 55 gal Drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3226:"
";}}}}}}
NCFI Enduratech Acrylic R Coating, 55 gal Drum
NCFI Enduratech® R (70-012) is a durable 100% acrylic elastomeric coating designed specifically for use over
new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.
Installation:
- May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
- All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
- Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
- Apply at temperatures above 50°F.
- Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing
NCFI Geo Terra-lok B Fast Catalyst for Single Component, 1 Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:428:"
NCFI Geo Terralok B Fast Catalyst, 1 Gallon Pail
NCFI TERRA LOK 24-120 Geo Foam is a low viscosity single component hydrophobic polyurethane used for increasing the load bearing capacity of loosely bound soils, filling voids and I/I mitigation Ideal for stopping active or flowing water leaks and eliminating water seepage through cracks in stationary concrete structures and asset.
";}}}}}} 
NCFI Geo Terra-lok B Regular Catalyst for Single Component, 5 Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:419:"NCFI Geo Terra-lok B Regular Catalyst, 5 Gal Pail
NCFI TERRA LOK 24-120 Geo Foam is a low viscosity single component hydrophobic polyurethane used for increasing the load bearing capacity of loosely bound soils, filling voids and I/I mitigation Ideal for stopping active or flowing water leaks and eliminating water seepage through cracks in stationary concrete structures and asset.
";}}}}}} 
No reviews submitted.