3M Full Face Peel Offs-25pk
The 3M Face shield peel off is a respiratory protection accessory that helps protect the lens on the 3M Full Facepiece 6000 Series (sold separately) from scratches, chips and dust. The cover is made from a soft material that never scratches and gently shields the lens. This accessory helps protect the investment made in respiratory equipment.
Allegro 1 Worker Full Mask Breathing Air Blower Respirator System w/ 50' Hose
1-Worker Full Mask Breathing Air Blower Respirator System w/ 50' Hose, Allegro Industries 9200-01A or 9815-EF1. These provide a portable air source for one respirator user. They include one NIOSH approved full mask supplied air respirator, a blower, flow meter, and one 50 foot (15.2 m) breathing air hose. Includes NIOSH approved respirator.
Includes:
• Blower: 120V, 60 Hz, 3.8A.
• Face Mask Lens: High impact polycarbonate.
• Face Mask Suspension: Non-slip durable rubber five point harness.
• Face Mask Seal: Hypoallergenic and chemical/ozone resistant.
• Breathing Air Hose: Braided Vinyl, 50 Ft.
Allegro 2 Worker Full Mask Breathing Cold Air Respirator System
The Allegro Two Worker Cold Air Full Mask System is a portable fresh, refrigerated air supply system. This system provides comfortable and safe cooled breathing air for industrial users who require an OSHA compliant fresh air supply system, with the advantages of air-conditioned air. It can maximize productivity and minimize the possibility of heat stroke, heat exhaustion, dehydration, nausea and cramps for your workers. While this cold air system improves the worker's safety and comfort, it also helps reduce their frequency and duration of breaks on the job. This self-contained, low-maintenance unit includes a removable, washable filter and is powder-coated for a longer lasting durability.
includes
Motor/Construction:
Full Face Mask Specifications:
Made of silicone rubber for better durability and will hold its shape even in extreme heat and cold. The double sealing flange provides an improved face-to-mask seal and a deep chin pocket provides a better, more comfortable fit. The replaceable polycarbonate lens offers a wider, distortion-free viewing area with an anti-fog, anti-scratch coating. The unique “over the shoulder” hose design clips at the collar and an adjustable belt holds the air hose out of the way of work. Includes NIOSH approved respirator(s).
Allegro 2 Worker Full Mask Low Pressure System with two 100' Hoses
Allegro Two Worker Pump, Model A-750, Ambient Air Pump 3/4hp Motor (9821) -Pump Only!
GENERAL DESCRIPTION:
Portable & lightweight air source for one hood user, or up to two full or half face respirator users. Solid performance in applications such as painting, cleaning, sanding, or chemical handling operations.
CONSTRUCTION:
*Warning: Breathing Air Pumps are not to be used with generators
*Warning: Air inlet to the pump must be located where breathable air can be assured at all times
Allegro Breathing Air Pump CO Monitor
The Breathing Air Pump CO Monitor alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm (5 ppm Canada). The CO monitor can be operated in AC or DC mode and uses a single 9V alkaline battery. Housed in a portable, rugged Pelican case with handle and latches for protection and security. Threaded tee is included.
Dimensions: 8.25″w x 6.75″h x 3.5″d
Weight: 3.5 lbs
Allegro Full Face Peel Offs, 25 pk
These clear Polyester lens peel offs help protect your respirator mask’s viewing area from dust, splash, and debris. They are intended for use with our Full-Mask Respirator (PN 9901). They are disposable and easily attaches to the facemask with peel-off adhesive strips. Available in packs of 25.
MATERIAL:
• Polyester
• .007 thickness
SIZE:
• 11” (27.9 cm) long x 4.75” (12.1 cm) wide
Allegro Personal Air Cooler-9991
Vortex Tubes are an effective, low-cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot air streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. A fraction of the hot air is discharged at the control valve. The remainder of the slower air stream is forced to counter-flow up through the center of the high-speed air stream, giving up heat, through the center of the generation chamber finally exiting through the opposite end as extremely cold air.
CONSTRUCTION: Body: Aluminum Fitting: Hansen 1/4” (0.63 cm) plug (series 1000) Stainless Steel Belt: Nylon
BENEFITS: • Uses filtered compressed air • Provides continuous cool air delivery • Easy temperature adjustment even with gloved hands • No moving parts • Exceptionally reliable • A control valve allows for temperature adjustment • Will cool compressed air by 25° F (-3.9° C) • Requires an air supply pressure range from 50 -115 psi
Motor/Construction:
Hood Specifications:
Made of a poly-coated Tyvek material, this hood offers the increased protection of two bibs. The inner bib tucks inside protective garments so air flows down for a cooling effect on the body, and the outer bib secures under the arms with hook and loop to keep the hood from rising up. The hood features an extra large lens for better visibility. It offers the same convenient design with the downtube and suspension built in, making the complete hood fully disposable. NIOSH approved.
Allegro Two Worker Wall Air Filtration Panel with CO Monitor
Our Wall-Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8+ airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada).
The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. Available with and without CO monitors. All models meet NIOSH requirements for point-of-attachment.
AllegroAir High Pressure Airline Cooling System
Designed for greater user comfort and increased worker productivity, the portable AllegroAir Airline Cooling System is the perfect solution to cool high pressure breathing air at a reduced cost. High pressure breathing air produced by air sources such as an air filtration panel or compressor cannot exceed 150 psi (10.34 bar). This lightweight yet highly effective cooling system is capable of reducing the breathing air temperature from 180º F (82.22° C) to as low as 50º F (10° C)!
NOTE: panel sold separately
Dimensions: 20″w x 21″l x 24″h
Weight: 28 lbs. (without ice)
Allegro Low Pressure Airline Cooling System-Cooler Only
Designed for greater user comfort and increased worker productivity, the portable Allegro Air Airline Cooling System is the perfect solution to cool low pressure breathing air at a reduced cost. This lightweight yet highly effective cooling system is capable of reducing the breathing air temperature from 180º F (82.22° C) to as low as 50º F (10° C)!
NOTE: pump sold separately
Dimensions: 20”w x 21”d x 24”h
Weight: 28 lbs. (without ice)
Posiwear M3 Spray Suits Size 2XL
Posiwear M3 Spray Suits Size 4XL
Posiwear M3 Spray Suits Size L
Posiwear M3 Spray Suits Size XL
