Shop by Brand, Category or Keyword

Carlisle ST1 Air Purge B-01 Spray Gun
$3,345.00
Carlisle ST1 Air Purge Spray Gun

Comes with B Mix Chamber and 01 Mix Tip (equivalent to 4242) w/ Accessory Kit

Smoother patterns, more uptime, and better ergonomics for sprayers. Over the course of 5 years, Carlisle assembled a team of industry-leading engineers, experienced technicians, and business owners to engineer the future of the spray foam insulation industry.

  •  Consistent spray patterns
  •  Check valve eliminates fluid and material from entering the air passage
  •  Quickly change tips and mix chamber to optimize flow and pattern width
  •  Simple, Durable Design
  •  Ultra Onyx coating improves gun body life and cleaning
  •  Higher performance side seal increases gun life, uptime
  •  Better Ergonomics
  •  Award-winning, the balanced handle allows sprayers to spray longer
  •  Swivel straps, handle winglets, and a 10% lighter design reduces hand stress


Carlisle ST1 Air Purge C-15 Spray Gun
$3,345.00

Carlisle ST1 Air Purge Spray Gun

Comes with C Mix Chamber and 15 Mix Tip (equivalent to 4747) w/ Accessory Kit

Smoother patterns, more uptime, and better ergonomics for sprayers. Over the course of 5 years, Carlisle assembled a team of industry-leading engineers, experienced technicians, and business owners to engineer the future of the spray foam insulation industry.

  •  Consistent spray patterns
  •  Check valve eliminates fluid and material from entering the air passage
  •  Quickly change tips and mix chamber to optimize flow and pattern width
  •  Simple, Durable Design
  •  Ultra Onyx coating improves gun body life and cleaning
  •  Higher performance side seal increases gun life, uptime
  •  Better Ergonomics
  •  Award-winning, the balanced handle allows sprayers to spray longer
  •  Swivel straps, handle winglets, and a 10% lighter design reduces hand stress


Carlisle ST1 Air Purge D-02 Spray Gun
$3,345.00

Carlisle ST1 Air Purge Spray Gun

Comes with D Mix Chamber and 02 Mix Tip w/ Accessory Kit

Smoother patterns, more uptime, and better ergonomics for sprayers. Over the course of 5 years, Carlisle assembled a team of industry-leading engineers, experienced technicians, and business owners to engineer the future of the spray foam insulation industry.

  •  Consistent spray patterns
  •  Check valve eliminates fluid and material from entering the air passage
  •  Quickly change tips and mix chamber to optimize flow and pattern width
  •  Simple, Durable Design
  •  Ultra Onyx coating improves gun body life and cleaning
  •  Higher performance side seal increases gun life, uptime
  •  Better Ergonomics
  •  Award-winning, the balanced handle allows sprayers to spray longer
  •  Swivel straps, handle winglets, and a 10% lighter design reduces hand stress

Carlisle ST1 Air Purge E-03 Spray Gun
$3,345.00

Carlisle ST1 Air Purge Spray Gun

Comes with E Mix Chamber and 03 Mix Tip w/ Accessory Kit

Smoother patterns, more uptime, and better ergonomics for sprayers. Over the course of 5 years, Carlisle assembled a team of industry-leading engineers, experienced technicians, and business owners to engineer the future of the spray foam insulation industry.

  •  Consistent spray patterns
  •  Check valve eliminates fluid and material from entering the air passage
  •  Quickly change tips and mix chamber to optimize flow and pattern width
  •  Simple, Durable Design
  •  Ultra Onyx coating improves gun body life and cleaning
  •  Higher performance side seal increases gun life, uptime
  •  Better Ergonomics
  •  Award-winning, the balanced handle allows sprayers to spray longer
  •  Swivel straps, handle winglets, and a 10% lighter design reduces hand stress

Carlisle ST1 Air Purge F-04 Spray Gun
$3,345.00

Carlisle ST1 Air Purge Spray Gun

Comes with F Mix Chamber and 04 Mix Tip w/ Accessory Kit

Smoother patterns, more uptime, and better ergonomics for sprayers. Over the course of 5 years, Carlisle assembled a team of industry-leading engineers, experienced technicians, and business owners to engineer the future of the spray foam insulation industry.

  •  Consistent spray patterns
  •  Check valve eliminates fluid and material from entering the air passage
  •  Quickly change tips and mix chamber to optimize flow and pattern width
  •  Simple, Durable Design
  •  Ultra Onyx coating improves gun body life and cleaning
  •  Higher performance side seal increases gun life, uptime
  •  Better Ergonomics
  •  Award-winning, the balanced handle allows sprayers to spray longer
  •  Swivel straps, handle winglets, and a 10% lighter design reduces hand stress

Graco Fusion AP Spray Gun 01 Chamber
$3,290.00

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

For high output spray polyurethane foam and polyurea applications.

  •  Easy air-blast tip cleaning reduces build-up and tip clogging.
  •  Long-lasting side seals means less downtime for maintenance
  •  Quick-release fluid housing - lets you easily change the mix chambers without tools
  •  Hand-tightened front cap - no tools needed to clean and maintain seals and mix chamber
  •  Ergonomic handle


Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Fusion AP Spray Gun 02 Chamber
$3,290.00

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

For high output spray polyurethane foam and polyurea applications.

  •  Easy air-blast tip cleaning reduces build-up and tip clogging.
  •  Long-lasting side seals means less downtime for maintenance
  •  Quick-release fluid housing - lets you easily change the mix chambers without tools
  •  Hand-tightened front cap - no tools needed to clean and maintain seals and mix chamber
  •  Ergonomic handle

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Fusion AP Spray Gun 03 Chamber
$3,290.00

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

For high output spray polyurethane foam and polyurea applications.

  •  Easy air-blast tip cleaning reduces build-up and tip clogging.
  •  Long-lasting side seals means less downtime for maintenance
  •  Quick-release fluid housing - lets you easily change the mix chambers without tools
  •  Hand-tightened front cap - no tools needed to clean and maintain seals and mix chamber
  •  Ergonomic handle

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Fusion ProConnect 02 Gun
$3,450.00
A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.

Unlike any other spray foam gun available

  •  A single cartridge replaces the entire fluid section in seconds
  •  Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP
  •  Integrated check valves for cross-over containment
  •  13 parts are replaced by a single ProConnect cartridge
  •  Eliminates the need to purchase fluid section o-rings
  •  Spare ProConnect cartridges can replace your back-up guns
  •  Retrofit Kit available to convert existing Fusion AP guns

Graco Fusion ProConnect 01 Gun
$3,450.00
A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.

Unlike any other spray foam gun available

  •  A single cartridge replaces the entire fluid section in seconds
  •  Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP
  •  Integrated check valves for cross-over containment
  •  13 parts are replaced by a single ProConnect cartridge
  •  Eliminates the need to purchase fluid section o-rings
  •  Spare ProConnect cartridges can replace your back-up guns
  •  Retrofit Kit available to convert existing Fusion AP guns

Graco GX-7 Gun ,GX-7A 1/90
$4,540.00

The GX-7 mechanical purge gun that is the gun of choice for roofing and slab jacking operations.

GX-7 guns offer dependability, performance, and pattern control in even the toughest of conditions.

  •  Many Applications
  •  GX-7 can handle both spray foam and polyurea applications
  •  Mixing Technology
  •  Industry-proven mix and atomization technology
  •  Built for Challenging Conditions
  •  Specifically designed for challenging job-site conditions
  •  Cleaner For Longer
  •  More air volume to air cap helps keep the gun's tip cleaner longer
  •  Easy Clean
  •  Solvent-free, mechanically self-cleaning



Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco GX-7 Gun, GX-7A 5/70
$4,540.00

The GX-7 mechanical purge gun that is the gun of choice for roofing and slab jacking operations.

GX-7 guns offer dependability, performance, and pattern control in even the toughest of conditions.

  •   Many Applications
  •  GX-7 can handle both spray foam and polyurea applications
  •   Mixing Technology
  •  Industry-proven mix and atomization technology
  •   Built for Challenging Conditions
  •  Specifically designed for challenging job-site conditions
  •  Cleaner For Longer
  •  More air volume to air cap helps keep the gun's tip cleaner longer
  •  Easy Clean
  •  Solvent-free, mechanically self-cleaning


Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


PMC AP-2 Air Purge Spray Gun with 01 Mixing Chamber
$2,524.00
AP-2 Air Purge Gun – Round with 01 Mixing Chamber This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. The AP-2 has fewer parts than the leading competitor. The traditional spool valve method of providing air to move the cylinder has been replaced with a one piece replaceable Cartridge Valve, eliminating the need for multiple O-rings. The short trigger stroke reduces operator fatigue, especially in high triggering applications such as residential insulation. The short trigger stroke also allows precise detail shots that cause competitive guns to struggle. Check valves not only protect against cross-over to the hoses, but PMC has also incorporated a separate check valve to protect the air passages of the gun. The Advanced Pattern Development and Mixing is accomplished with the unique Chamber/PCT design which provides a multitude of spray pattern and mixing combinations. Chambers are available in all common and half sizes. The hardened PCT’s are available in Round, Flat, Blaster and Pour Configurations. Simple assembly and disassembly is accomplished by having fewer parts and requiring fewer tools to work on this gun. PMC offers the AP-2 with an optional Steel Gun Block.

PMC AP-2 Air Purge Spray Gun with 02 Mixing Chamber
$2,524.00
AP-2 Air Purge Gun – Round with 02 Mixing Chamber This economically priced gun weighing a mere 2.4 lbs (1.1 kg) is one of the lightest and smallest plural component spray guns on the market today. The Chamber, PCT, Screen Screw Parts, Coupling Block and Check Valves are the same parts used in the proven PMC AP-2 Air Purge Gun. The AP-2 has fewer parts than the leading competitor. The traditional spool valve method of providing air to move the cylinder has been replaced with a one piece replaceable Cartridge Valve, eliminating the need for multiple O-rings. The short trigger stroke reduces operator fatigue, especially in high triggering applications such as residential insulation. The short trigger stroke also allows precise detail shots that cause competitive guns to struggle. Check valves not only protect against cross-over to the hoses, but PMC has also incorporated a separate check valve to protect the air passages of the gun. The Advanced Pattern Development and Mixing is accomplished with the unique Chamber/PCT design which provides a multitude of spray pattern and mixing combinations. Chambers are available in all common and half sizes. The hardened PCT’s are available in Round, Flat, Blaster and Pour Configurations. Simple assembly and disassembly is accomplished by having fewer parts and requiring fewer tools to work on this gun. PMC offers the AP-2 with an optional Steel Gun Block.

PMC PX-7 A3 Pour Gun Package
$4,187.00

PX-7 Mechanical Purge Gun

PX-7 incorporates a valving rod to mechanically purge the mixed material from the mixing module at the end of each shot; eliminates the need for solvent flushing or air purge. Flat pattern spray.

Ideal for Slab Jacking (Concrete Lifting), Roofing, Residential Foam and Coatings

  •   Economically Priced
  •   Mechanically Self Cleaning
  •   Solvent Free
  •   Airless Atomization
  •   Internal Impingement
  •   Machined Coupling Block
  •   Hand Honed Valving Rod
  •   Rebuildable Manual Valves
  •   Stainless Steel Hardened Gun Block
  •   A3 Pour Module

PMC PX-7 A5 Pour Gun Package
$4,187.00
PX-7 Mechanical Purge Gun PX-7 incorporates a valving rod to mechanically purge the mixed material from the mixing module at the end of each shot; eliminates the need for solvent flushing or air purge. Flat pattern spray. Ideal for Slab Jacking (Concrete Lifting), Roofing, Residential Foam and Coatings Economically Priced Mechanically Self Cleaning Solvent Free Airless Atomization Internal Impingement Machined Coupling Block Hand Honed Valving Rod Rebuildable Manual Valves Stainless Steel Hardened Gun Block A5 Pour Module

PMC PX-7 Mechanical Purge Gun
$4,187.00

PX-7 Mechanical Purge Gun

PX-7 incorporates a valving rod to mechanically purge the mixed material from the mixing module at the end of each shot; eliminates the need for solvent flushing or air purge. Flat pattern spray.

Ideal for Slab Jacking (Concrete Lifting), Roofing, Residential Foam and Coatings

  •  Economically Priced
  •  Mechanically Self Cleaning
  •  Solvent Free
  •  Airless Atomization
  •  Internal Impingement
  •  Machined Coupling Block
  •  Hand Honed Valving Rod
  •  Rebuildable Manual Valves
  •  Stainless Steel Hardened Gun Block

Models Available

  •  Pour
  •  Low Output Coatings
  •  High Output Spray Foam and Coatings

PMC Xtreme 01 Chamber Spray Gun
$2,477.00
The PMC Xtreme gun offers proven reliability, with as much as 60 sets of material sprayed with the same diamond plated mixing chamber and engineered resin side seal set. The robust trigger assembly has been improved, moving to a spool and liner designed for increased reliability and consistency. A spring-loaded check valve locks chemical out of the handle, eliminating material seepage into any of the porting or trigger area.

  • 1
  • 2