Related Products of NCFI InsulStar Optimaxx 1.7# HFO Slow/Summer Closed Cell Foam
NCFI Terrathane 24-038 Geotechnical Foam System
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:507:"NCFI Terrathane 24-038 Geotechnical Foam System
";}}}}}}
NCFI 24-038 is a plural component, co-blown, all PMDI-based, nominal 8 pcf density, hydro-insensitive polyurethane foam system designed for concrete slab raising, under-slab void fill and cavity fill applications where a high degree of foam strength is demanded. NCFI 24-038 is formulated to be machine processed using applicable plural component polyurethane processing equipment.

NCFI Terrathane Polyurethane 24-035 Manhole Liner
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:388:"NCFI GEO Terrathane Polyurethane Polyurea Manhole Liner
NCFI 24-035 is a two-component, water blown, MDI based spray polyurethane-polyurea hybrid system
designed for use as a high strength backing material or
primary surface material for stabilizing masonry surfaces.
NCFI 24-035 has been formulated to spray at 6 – 8 pcf
based on lift thickness.
";}}}}}} 
NCFI Isocyanate Terra-Lok Soil Stabilizer for Single Component, A Side, 4 Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:565:" NCFI-120 (formerly 24-120) Isocyanate Terra-Lok Soil Stabilizer for Single Component, A Side, 4 Gallon Pail
NCFI-120 is a low viscosity single component hydrophobic prepolymer used for increasing the
load bearing capacity of loosely bound soils, filling voids and I/I mitigation. Ideal for stopping
active or flowing water leaks and eliminating water seepage through cracks in stationary
concrete structures and assets. Depending on the application, NCFI-120 can be on its own or
paired with B-24-NCFI-CR OR B-24-NCFI-CF
";}}}}}} 
NCFI Terra-Lok Pump Flush, 5 Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:526:"NCFI Concrete Lifting Terra-Lok Pump Flush, 5 Gallon Pail
NCFI Terra-Lok Pump Flush for Geo Foam is a highly effective flush
and parts cleaner for airless paint and coating
pumps including ancillary parts used in the
application of Terra-Lok single component
prepolymer products. Only for 24-120 products!
Recommended Materials:
- O-Rings Gaskets
- Hoses
- Pump Packaging
";}}}}}}
NCFI Geo Terra-Lok Regular Catalyst for Single Component, B Side, 5 Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:557:"NCFI-120 (formerly 24-120) Geo Terra-lok Regular Catalyst for Single Component, B Side, 5 Gallon Pail
NCFI-120 is a low viscosity single component hydrophobic prepolymer used for increasing the
load bearing capacity of loosely bound soils, filling voids and I/I mitigation. Ideal for stopping
active or flowing water leaks and eliminating water seepage through cracks in stationary
concrete structures and assets. Depending on the application, NCFI-120 can be on its own or
paired with B-24-NCFI-CR OR B-24-NCFI-CF
";}}}}}} 
NCFI Terrathane 24-011 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:535:"
NCFI 5RH (formerly 24-011) Dual Component Polyurethane
NCFI-5RH is a 5lb per ft³, hydrophobic / hydro-insensitive, MDI-based, water-blown polyurethane with moderate reactivity, formulated for exceptional spread and lifting capacity. Developed for concrete lifting and industrial/heavy-commercial use, it is intended for conditions where there are higher-than-typical loads, delivering high compressive strength and maintaining physical properties in wet or saturated conditions
";}}}}}} 
NCFI Geo Terra-lok Fast Catalyst for Single Component, B Side, 1 Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:542:"
NCFI-120 (formerly 24-120) Geo Terra-lok Fast Catalyst for Single Component, B Side, 1 Gallon Pail
NCFI-120 is a low viscosity single component hydrophobic prepolymer used for increasing the
load bearing capacity of loosely bound soils, filling voids and I/I mitigation. Ideal for stopping
active or flowing water leaks and eliminating water seepage through cracks in stationary
concrete structures and assets. Depending on the application, NCFI-120 can be on its own or
paired with B-24-NCFI-CR OR B-24-NCFI-CF
";}}}}}} 
NCFI Isocyanate Terra-Lok Soil Stabilizer for Single Component, A side, 55 Gallon Drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:561:"NCFI-120 (formerly 24-120) Isocyanate Terra-Lok Soil Stabilizer for Single Component, A side, 55 Gal Drum
NCFI-120 is a low viscosity single component hydrophobic prepolymer used for increasing the
load bearing capacity of loosely bound soils, filling voids and I/I mitigation. Ideal for stopping
active or flowing water leaks and eliminating water seepage through cracks in stationary
concrete structures and assets. Depending on the application, NCFI-120 can be on its own or
paired with B-24-NCFI-CR OR B-24-NCFI-CF
";}}}}}} 
NCFI Enduratech R Acrylic Coating, 55 gal Drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3226:"
";}}}}}}
NCFI Enduratech Acrylic R Coating, 55 gal Drum
NCFI Enduratech® R (70-012) is a durable 100% acrylic elastomeric coating designed specifically for use over
new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.
Installation:
- May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
- All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
- Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
- Apply at temperatures above 50°F.
- Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing
NCFI Enduratech Q Acrylic Coating, 55 gal Drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3226:"
";}}}}}}
NCFI Enduratech Acrylic Coatings, 55 gal drum
NCFI EnduraTech® Q (70-014) is a durable 100% acrylic elastomeric coating designed specifically for use over
new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.
Installation:
- May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
- All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
- Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
- Apply at temperatures above 50°F.
- Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing temperatures occur.
NCFI Enduratech 2.8# HFO Roofing Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4433:"
";}}}}}}
NCFI Enduratech 2.8# HFO Roofing Foam
NCFI 10-016 is a two component, HFO blown spray polyurethane foam system designed for use as a
self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing system.
10-016 is available in multiple speeds for use in varying temperature conditions. 10-016 complies with
ASTM D7425 and has been formulated to spray at a 2.8 pound density, depending on lift thickness,
and may be used in applications of the EnduraTech®
roofing systems.
NCFI Terrathane 24-042 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4892:"
";}}}}}}
NCFI 3.5RH (formerly 24-042) Dual Component Polyurethane
NCFI 3.5RH is a 3.5lb per ft³ water blown, MDI-based, hydrophobic / hydro-insensitive geotechnical polyurethane formulated for exceptional spread and lifting capacity. The hydrophobic nature of NCFI 3.5RH allows it to maintain exceptional physical properties even in saturated conditions. This product should be selected when flow is critical.
NCFI Strata-Fill 24-039 Low Exotherm Polyurethane System
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4962:"
";}}}}}}
NCFI 2.2 SHX (formerly 24-039) Low Exotherm Polyurethane System
NCFI-2.2SH is a hydrophobic/hydro-insensitive, two-component, water-blown polyurethane system. With a density of 2.2 lb per ft³, slow reactivity, and lower exotherm reaction it provides extended flow and high lift capability, making it well-suited for large-volume void fills, pipe and underground tank abandonment, and open-access projects in wet or saturated conditions.
NCFI Strata-Fill 24-070 Low Exotherm Polyurethane System
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4250:"
";}}}}}}
NCFI 2.2SX (formerly 24-070) Strata-Fill Low Exotherm Polyurethane System
Strata-Fill 24-070 is a two-component, HF0
blown, low-exotherm polyurethane system.
24-070 offers slow reactivity for greater flow,
making it ideal for filling large void areas, pipe
abandonment, and underground tank
abandonment.
NCFI Terrathane 24-044 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5222:"
";}}}}}}
NCFI 3RH (formerly 24-044) Dual Component Polyurethane
NCFI-3RH is a 3lb per ft³ fast-reacting, hydrophobic / hydro-insensitive system formulated for residential slab lifting. it provides great spread while still allowing precise control for lifting sidewalks, driveways, and interior floors as well as light commercial applications. Its hydrophobic nature makes it ideal for saturated soils and water-filled voids.
NCFI Terrathane 24-024 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3724:"
";}}}}}}
NCFI Terrathane 24-024 Dual Component Polyurethane
TerraThaneâ„¢ 24-024 is a 2lb hydrophobic / hydroinsensitive, MDI-based, water blown system that is
formulated for exceptional spread and lifting capacity.
The 24-024F’s hydrophobic nature allows it to maintain
exceptional physical properties even in saturated
conditions.
NCFI Strata-Fill 24-023 Low Exotherm Polyurethane System
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3488:"
";}}}}}}
NCFI 2.2FX (formerly 24-023) Low Exotherm Polyurethane System
NCFI-2.2FX is a 2.2lb fast-reacting spray or pour system formulated for trench breaker applications and large, open void fills. Its lowexotherm profile supports thick lifts without overheating, and its quick reactivity makes it ideal for vertical and open-access placements
NCFI Terrathane 24-003 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4721:"
";}}}}}}
NCFI 4RH (formerly 24-003) Dual Component Polyurethane
NCFI-4RH is a 4lb hydrophobic / hydro-insensitive, MDI-based, water blown system that is designed for exceptional spread and lifting capacity. The hydrophobic nature of NCFI-4RH allows it maintain exceptional physical properties even in saturated conditions. This system is typically selected for DOT and roadwork and is also typically used for void filling, concrete lifting, and deep soil injection applications
- 1
- 2
