Shop by Brand, Category or Keyword

Abrasion-Resistant Black Nylon 2.5" Black Scuff Guard 200'
$428.57
Abrasion-Resistant Black Nylon 2.5" BLACK SCUFF GUARD 200'

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Bedford After Market Graco Manifold Filter ,# 60 Mesh Long, 2 PK
$29.70
Using a standard pump manifold filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 60 mesh for materials such as latex primer, latex paints, and latex enamels.
  •   Inline Filter Replacement Screen

Graco 20 Inch Extension Pole
$53.25

Great for spraying ceilings, eaves and other places that are just a little out of spray painting reach.

  •  Will fit most airless sprayer guns with 7/8" thread
  •  Can be combined for extended reach up to 6' (1.8 m)
  •  Maximum WPR: 4050 psi, (280 bar, 28.0 Mpa)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco 2000PSI Heated Hose, Scuffed with RTD and SG
$2,380.00

Graco Heated Spray Hose

  •   50' section
  •   2000psi
  •   3/8"
  •   RTD Cable and SG
  •   Neon Blue Scuff 
  •   Graco Item#24K240


Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Fluid Temp Sensor Kit with RTD, for single hose
$560.00

Fluid Temp Sensor Kit with RTD, for single hose.

This is the unit that controls the temperature of your hoses. The sensor probe goes into the hose and measures the actual fluid temperature. It should be placed between the last 15m (50′) section and the whip hose.

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Manifold Filter ,#60 Mesh 2pk
$39.60

Using a standard pump manifold filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 60 mesh for materials such as latex primer, latex paints, and latex enamels.

  •  Inline Filter Replacement Screen

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Manifold Filter Support
$44.00
Graco Filter Support

The manifold filter support sits inside the manifold filter assembly. The easy out filter is then placed on the outside of the support. The airless sprayer filter support works to prevent the main element from be crushed when hit with paint at a high pressure.

Graco Swivel Hose 5000 PSI 3/8F X 1/4F
$132.00

GRACO SWIVEL HOSE 5000 PSI 3/8F X 1/4F



Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Graco Whip Hose,HTD,10',1/4ID,2000 PSI..
$888.00

10 ft (3m) Whip Hose with Xtreme-Wrap Scuff Guard and 1/4 in (6.33mm) inside diameter.

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Hose 2 1/2" Black Scuff Guard, 50'
$160.00

2-1/2" Hose Scuff Guard 50'

  •  Sold per 50'
  •  Black

PMC 3/8 X 50' HOSE ASY LP W/ RTD
$2,394.00

PMC 3/8 x 50' Hose Asy; LP; w/ RTD; w/ Scuff


Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


PMC 3/8X50' Hoseasy LP NOTC W/SCUFF..
$2,369.00

Low Pressure Braided Heated Hose – Product ID #200005 | 3/8×50 LP, W/Scuff, No TC 2,250 psi (155.13 bar). PMC’s unique heated hose system design features a copper weave element to provide full hose coverage for more efficient heating.

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


PMC 3/8x50'HoseAsy HP W/RTD W/Scuff..
$3,409.00

PMC 3/8x50'HoseAsy;HP;W/RTD;W/Scuff



Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


PMC MA-00006A Tsu Wire 50'
$319.43

PMC TSU WIRE; 50'



Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Sidewinder 210' Insulated Hose Sleeve Bundle
$2,643.57
Spray foam hoses take a beating when pulled around job sites. It’s not long before roll after roll of duct tape is used in an attempt to patch and repair existing hose socks. We have seen it all, carpet underlay, insulated tarps, even denim pants used to protect and insulate spray hose. Now, your operators hate how bulky, unwieldy and cumbersome the hose is to operate. Production slows, profits decline, and colder temperatures present the challenge of maintaining proper SPF temperature. The New Industry Standard Has Arrived! As a solutions provider, we have revolutionized how Spray Foam contractors operate by developing SPF Hose Wrap and Coupler Guards designed to maximize yield and performance by providing unmatched abrasion protection and thermal retention. In addition to the urethane-coated cordura sleeve, the Sidewinder SPF InsulWrap features a radiant liner proven to maximize the thermal retention gain by 25 Delta T over a standard hose sock! The sleeve features internal straps to secure the sleeve around any spray hose! 
 This kit includes: 
  •  (4) SW-2175-Insulated Sleeve 
  •  (4) SW-2176-Insulated Coupler Guard
  •  (1) SW-2413 -Non Insulated Whip Hose Cover

Sidewinder 210' Non Insulated Hose Sleeve Bundle
$1,626.89
Spray foam hoses take a beating when pulled around job sites. It’s not long before roll after roll of duct tape is used in an attempt to patch and repair existing hose socks. We have seen it all, carpet underlay, insulated tarps, even denim pants used to protect and insulate spray hose. Now, your operators hate how bulky, unwieldy and cumbersome the hose is to operate. Production slows, profits decline, and colder temperatures present the challenge of maintaining proper SPF temperature. The New Industry Standard Has Arrived! As a solutions provider, we have revolutionized how Spray Foam contractors operate by developing SPF Hose Wrap and Coupler Guards designed to maximize yield and performance by providing unmatched abrasion protection and thermal retention. In addition to the urethane-coated cordura sleeve, the Sidewinder SPF InsulWrap features a radiant liner proven to maximize the thermal retention gain by 25 Delta T over a standard hose sock! The sleeve features internal straps to secure the sleeve around any spray hose! 
 
This kit includes: 
  •  (4) SW-2173-Non Insulated Sleeve 
  •  (4) SW-2174-Non Insulated Coupler Guard 
  •  (1) SW-2413- Non Insulated Whip Hose Cover

  • 1
  • 2