NCFI InsulBloc Optimaxx 2.0# HFO Closed Cell Foam
NCFI InsulBloc Optimaxx 2.0# HFO Closed Cell Foam
11-037 InsulBloc SmartSPF is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBlock SmartSPF insulation system is suitable for application on the exterior or interior side of Type I, Type II, Type III, IV and V building walls as well as other insulation applications.
Temperature Range Guideline: 40 degrees - 80 degrees F
| Weight | 453592 grams |
If you have purchased the product, you can review it from the order details screen.
Related Products
NCFI InsulBloc Optimaxx 2.0# HFO Fast/Winter Closed Cell Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:7856:"
";}}}}}}
NCFI InsulBloc Optimaxx 2.0# HFO Winter Closed Cell Foam
11-037 InsulBloc SmartSPF is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBlock SmartSPF insulation system is suitable for application on the exterior or interior side of Type I, Type II, Type III, IV and V building walls as well as other insulation applications.
Cold Weather Foam. Temperature Range Guideline: 10 degrees - 50 degrees F
NCFI Enduratech Acrylic R Coating, 55 gal Drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3226:"
";}}}}}}
NCFI Enduratech Acrylic R Coating, 55 gal Drum
NCFI Enduratech® R (70-012) is a durable 100% acrylic elastomeric coating designed specifically for use over
new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.
Installation:
- May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
- All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
- Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
- Apply at temperatures above 50°F.
- Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing
NCFI Enduratech Acrylic Coatings, 55 gal drum
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3226:"
";}}}}}}
NCFI Enduratech Acrylic Coatings, 55 gal drum
NCFI EnduraTech® Q (70-014) is a durable 100% acrylic elastomeric coating designed specifically for use over
new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.
Installation:
- May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
- All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
- Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
- Apply at temperatures above 50°F.
- Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing temperatures occur.
NCFI ProAg 2.0# HFO Closed Cell Regular Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:3:{s:4:"type";s:4:"text";s:7:"default";i:1;s:7:"content";s:7267:"";}}}}}}
A High-Performance SPF Insulation System Designed to Save Big on Energy Costs, Control Moisture, Provide More Consistent Temperature Control, Eliminate Air Infiltration, and Lower Overall Operating Costs.
ProAg™ is the most energy-efficient, closed-cell spray foam insulation system available for agricultural applications. Renewable resources are a part of our formulation. It can save the agricultural business owner a considerable amount on energy costs, compared to other conventional types of insulation, and will eliminate air infiltration, allowing for a more consistent and controlled environment for poultry and livestock. It can also be used for insulating liquid storage tanks, freezers, and cold storage facilities for storing perishable items such as potatoes, onions, tomatoes, and nuts, among others. (Please consult Profoam Polyurethanes for proper cooler and freezer applications and design.)
NCFI ProFill Plus Open Cell Foam
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5682:"
";}}}}}}
NCFI ProFill Plus Open Cell Foam
PROFILL PLUS OC-500 is a two component, one-to-one by volume, no-mix, self-adhering,
seamless spray applied open cell polyurethane insulation system. This system has been
formulated with water as the blowing agent and does not contain CFC, HCFC, HFC or
formaldehyde. PROFILL PLUS OC-500 is suitable for use in Type I to V construction.
NCFI Terrathane 24-024 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3724:"
";}}}}}}
NCFI Terrathane 24-024 Dual Component Polyurethane
TerraThane™ 24-024 is a 2lb hydrophobic / hydroinsensitive, MDI-based, water blown system that is
formulated for exceptional spread and lifting capacity.
The 24-024F’s hydrophobic nature allows it to maintain
exceptional physical properties even in saturated
conditions.
NCFI Terrathane 24-010 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3955:"";}}}}}}
NCFI Terrathane 24-010 Dual Component Polyurethane
TerraThane™ 24-010 is a 2.8lb water blown, MDI-based geotechnical polyurethane formulated for quick expansion and pinpoint control for lifting and leveling. 24-010 is available with an NSF/ ANSI 61 Section 5 –2017 certification
NCFI Strata-Fill 24-070 Low Exotherm Polyurethane System
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4232:"
";}}}}}}
NCFI Strata-Fill Low Exotherm Polyurethane System
Strata-Fill™ 24-070 is a two-component, HF0
blown, low-exotherm polyurethane system.
24-070 offers slow reactivity for greater flow,
making it ideal for filling large void areas, pipe
abandonment, and underground tank
abandonment.
NCFI Terrathane 24-044 Dual Component Polyurethane
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5194:"
";}}}}}}
NCFI Terrathane 24-044 Dual Component Polyurethane
TerraThane™ 24-044 is a 3.0lb hydrophobic / hydroinsensitive, MDI-based, water blown system formulated
for excellent expansion and pinpoint control for
structural lifting and leveling. The 24-044’s hydrophobic
nature allows it to maintain exceptional physical
properties even in saturated conditions. Available with
NSF/ANSI 61 Section 5 – 2017 certification.
No reviews submitted.