Stoner Urethane E238 Anti Stick Coating Safety Data Sheet (SDS)
Stoner Anti Stick Coating-1 Can
Brand
Stoner Anti Stick Coating-1 Can-New & Improved Formula
Apply E238 anti-stick coating onto surfaces to prevent spray foam from sticking to treated equipment, window frames, pipes, and masked off work areas. Allows for easy removal of overspray. E238 is a specially formulated, durable, thin, anti-stick coating that prohibits polyurethane and other adhesives from bonding to treated surfaces.
| Weight | 453.59 grams |
If you have purchased the product, you can review it from the order details screen.
Related Products
GSP Cirr D Bond: 1-Gallon Jug
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3643:"
";}}}}}}
GSP Cirr D Bond: 1-Gallon Jug-Crystalized Isocyanates & Resin Remover
CIRR D-BOND Crystallized Isocyanates & Resin Remover is an Immersion Cleaner used to remove both cured and uncured polymer and resin buildup. This powerful solution can tackle a range of coatings, from aqueous and solvent-based paints and lacquers to varnishes, latex, rubber, and resins. It is also effective against tough adhesives like dried cyanoacrylate, silicones, two-component PU Silicone, and bi-component polyurethanes. Go Green Wipes are used for quick hand wipe applications.
Use CIRR D BOND™ Full Strength (Do NOT add water) at room temperature OR heat to a maximum of 140 °F in a well-ventilated area. When heated, a faster polymer and resin removal result is obtained. The use of an ultrasonic Immersion tank will enhance the loosening performance.
- ONLY IMMERSION CLEANING FOR BUILD UP OF HARDENED ISO(A) & INDUSTRIAL RESINS AT A MAX OF 140 °F
- SAFE ON ALL FERROUS & NON-FERROUS METALS
- DENSER & MORE AGGRESSIVE FORMULA
Available in a 5-gallon pail or 1-gallon jug.
GSP Cirr D Bond: 5-Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:3655:"
";}}}}}}
GSP Cirr D Bond: 5 Gallon Pail-Crystalized Isocyanates & Resin Remover
CIRR D-BONDâ„¢ Crystallized Isocyanates & Resin Remover is an Immersion Cleaner used to remove both cured and uncured polymer and resin buildup. This powerful solution can tackle a range of coatings, from aqueous and solvent-based paints and lacquers to varnishes, latex, rubber, and resins. It is also effective against tough adhesives like dried cyanoacrylate, silicones, two-component PU Silicone, and bi-component polyurethanes. Go Green Wipes are used for quick hand wipe applications.
Use CIRR D BOND™ Full Strength (Do NOT add water) at room temperature OR heat to a maximum of 140 °F in a well-ventilated area. When heated, a faster polymer and resin removal result is obtained. The use of an ultrasonic Immersion tank will enhance the loosening performance. 
- ONLY IMMERSION CLEANING FOR BUILD UP OF HARDENED ISO(A) & INDUSTRIAL RESINS AT A MAX OF 140 °F
- SAFE ON ALL FERROUS & NON-FERROUS METALS
- DENSER & MORE AGGRESSIVE FORMULA
Available in a 5-gallon pail or 1-gallon jug.
Dynasolve CU-6 1g
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:8488:"
";}}}}}}
Dynasolve CU-6 1g
Dynasolve CU-6is a non-gelling, higher flash point version of CU-5, and is recommended for both flushing and cleaning, especially in applications in which liquid isocyanates are present either prior to cleaning, or will be introduced after cleaning (such as in a mixing tank).Dynasolve CU-6is non-chlorinated, nonflammable (by U.S. Department of Transportation definition), non-carcinogenic, and non-ozone depleting. It replaces and improves on the performance of commodity solvents such as methylene chloride, acetone, methyl ethyl ketone (MEK), and 1,1,1-trichloroethane.Dynasolve CU-6can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation.
Directions for Use:
For Flushing: Use Dynasolve CU-6as you would normally use any other flushing solvent. Mild heating of the solvent will product faster results. The use of compressed air for agitation of the solvent will also help to facilitate cleaning. If excessive amounts of liquid isocyanates are present, Dynasolve Iso-Neutralizer must be used first. Failure to use the Iso-Neutralizer may lead to gelling of the flushing solvents.
For Cleaning: Immerse parts to be cleaned in Dynasolve CU-6. Let soak until residue is loosened and can be wiped or brushed off. Then rinse parts with water and dry. Mild heating of the solvent to 130-150° F, and/or the use of ultrasonics will produce faster results. Mechanical filtering of larger urethane particles using a cheesecloth or metal mesh filter will help extend the life of the solvent. For the most difficult applications, more aggressive (reactive) solvents are available.
Materials of Construction:
Recommend: Teflon, butyl rubber, silicon rubber, Kalrez, mild steel, Halar, melamine, Nylon 101, polyethylene, polypropylene, Ryton (150°F or less).
Avoid: Viton, PVC, ABS, Buna-N, Durel, Hypalon, Kynar, Lexan, Lucite, Neoprene, Noryl EN-265, Noryl 731, PET, phenolic, polyester, polysulfone, polyurethane, Ultem, Valox.
Cautions:
Dynasolve CU-6contains powerful organic solvents. It is harmful if inhaled or swallowed. Avoid breathing vapors or mist. Keep away from heat and flame. Avoid contact with eyes and skin. Wear gloves, safety glasses, and protective clothing when handling. Use with adequate ventilation.
- Dynasolve CU-6 is especially effective for flushing mixing and metering equipment and feed lines, as it quickly and completely cleans polyols, crystallized isocyanates, and other urethane intermediates. However, in cleaning of isocyanate sides of equipment, Dynasolve Iso-Neutralizer should be used first if excessive onlyamounts of liquid isocyanates are present. Dynasolve CU-6 will not gel in contact with liquid isocyanates, but if limited amounts are present.
- Dynasolve CU-6 is very effective in penetrating, loosening, and removing cured urethane foam deposits andbuild-up from mixing heads, troughs, conveyor parts, side walls, rollers, foam cutting devices and molds.
- Dynasolve CU-6 will remove all types of urethanes: flexible, rigid, elastomers, molded, and adhesives. It iseffective for both MDI and TDI esters and ethers.
- Dynasolve CU-6 will quickly and completely clean residual cured polyurethane reactive hot melt (PURHM)urethane adhesives from roll coating equipment. It will also remove these same reactive hot melts fromdispensing equipment.
- Dynasolve CU-6 is excellent for the removal of polymer-based inks from rollers in flexographic printingequipment.
- When heated, Dynasolve CU-6 will also clean many types of epoxies and other adhesives.
GSP Surf A Lube: 1-Gallon Jug
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5498:"
";}}}}}}
GSP Surf A Lube: 1 Gallon Jug-Equipment Storage Fluid
SurfaLube Equipment Storage Fluid is used as a storage fluid in Urethane Dispensing Equipment and Polyurea Spray Equipment. Its coalescing properties allow the storage of equipment for up to 36 months. With a superior environmental profile, SurfaLube is stable under normal storage conditions. Compatible with machines and transfer pumps made of Carbon Steel, Stainless Steel, and Aluminum Alloys. Gentle on most O-rings, gaskets, seals and lining. Does not freeze under a severe cold environment (<-90 °F).
Pump SurfaLube into the system so that it remains in hoses and lines. Store the unit in a cool and dry (moisture-free) area for up to 36 months.
- USED IN SPRAY EQUIPMENT FOR MID TO LONG TERM STORAGE UP TO 36 MONTHS
- USED IN TRANSFER PUMPS, HOSES, PROPORTIONERS & GUNS
- ALSO ACTS AS A PLASTICIZER, PREVENTING ISO (A) FROM FORMING CRYSTALS
- IDEAL FOR WINTERIZING RIGS & CAN WITHSTAND SEVERE COLD TEMPS WITHOUT FREEZING
- VOC EXEMPT, NON-FLAMABLE & NON-CORROSIVE
Available in a 5-gallon pail or 1-gallon jug.
GSP Surf A Lube: 5-Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:6679:"
";}}}}}}
GSP Surf A Lube: 5 Gallon Pail -Equipment Storage Fluid
SurfaLube Equipment Storage Fluid is used as a storage fluid in Urethane Dispensing Equipment and Polyurea Spray Equipment. Its coalescing properties allow the storage of equipment for up to 36 months. With a superior environmental profile, SurfaLube is stable under normal storage conditions. Compatible with machines and transfer pumps made of Carbon Steel, Stainless Steel, and Aluminum Alloys. Gentle on most O-rings, gaskets, seals and lining. Does not freeze under a severe cold environment (<-90 °F).
Pump SurfaLube into the system so that it remains in hoses and lines. Store the unit in a cool and dry (moisture-free) area for up to 36 months.
- USED IN SPRAY EQUIPMENT FOR MID TO LONG TERM STORAGE UP TO 36 MONTHS
- USED IN TRANSFER PUMPS, HOSES, PROPORTIONERS & GUNS
- ALSO ACTS AS A PLASTICIZER, PREVENTING ISO (A) FROM FORMING CRYSTALS
- IDEAL FOR WINTERIZING RIGS & CAN WITHSTAND SEVERE COLD TEMPS WITHOUT FREEZING
- VOC EXEMPT, NON-FLAMABLE & NON-CORROSIVE
Available in a 5-gallon pail or 1-gallon jug.
GSP Surf X Flush: 1-Gallon Jug
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:6689:"
";}}}}}}
GSP Surf X Flush 2000: 1-Gallon Jug-Polyurethane Foam, Resin & Coating Remover
SURF X FLUSH 2000 Polyurethane Foam, Resin & Coating Remover, Flushing large amounts of Hardened Isocyanate (A) and Polyol (B). For Immersion Cleaning of mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam curing devices, holding tanks, feeding lines, and mixing equipment, use the product at full strength at room temperature or at a maximum temperature of 150°F. Go Green Wipes are used for quick hand wipe applications.
The maximum flushing time is 4 hours; you should not leave the product in the system overnight. Use the product at full strength and at room temperature, and do not heat it during the flushing process. To flush out the entire ISO (A) Line throughout the system, place the Transfer Pump in a pail containing 2-3 gallons of SURF X FLUSH 2000™. Recirculate until the solvent runs clear (maximum of 4 hours), and then rinse with 2-3 gallons of NZD ISO FLUSH ™. Please dispose of the spent solvent and ISO mixture in a waste bucket and do not reuse it. Once the system is free of Isocyanates, you can purge it with a few quarts of Isocyanates and start spraying. Don't forget to add SurfaLube™ Equipment Storage Fluid to the lines when storing your equipment (up to 3 years). For immersion cleaning of mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam curing devices, holding tanks, feeding lines and mixing equipment, use the product at full strength at room temperature or a maximum temperature of 150 °F.
- FLUSHING, LOW-PRESSURE SPRAY FOR LARGE AMOUNTS OF HARDENED ISO (A) & REMOVING OVERSPRAY FROM UNPAINTED SURFACES
- FLUSHING POLYOL (B) & ALL OTHER URETHANE INTERMEDIATES
- IMMERSION CLEANING FOR RESIN & POLYMERS MAX OF 140 °F
- MEDIUM DENSITY
Available in a 5-gallon pail or 1-gallon jug. This product also comes in Go Green Wipes - 90 sheets.
GSP Surf X Flush: 5-Gallon Pail
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:7277:"
";}}}}}}
GSP Surf X Flush 2000: 5-Gallon Pail-Polyurethane Foam, Resin & Coating Remover
SURF X FLUSH 2000 Polyurethane Foam, Resin & Coating Remover, Flushing large amounts of Hardened Isocyanate (A) and Polyol (B). For Immersion Cleaning of mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam curing devices, holding tanks, feeding lines, and mixing equipment, use the product at full strength at room temperature or at a maximum temperature of 150°F. Go Green Wipes are used for quick hand wipe applications.
The maximum flushing time is 4 hours; you should not leave the product in the system overnight. Use the product at full strength and at room temperature, and do not heat it during the flushing process. To flush out the entire ISO (A) Line throughout the system, place the Transfer Pump in a pail containing 2-3 gallons of SURF X FLUSH 2000™. Recirculate until the solvent runs clear (maximum of 4 hours), and then rinse with 2-3 gallons of NZD ISO FLUSH ™. Please dispose of the spent solvent and ISO mixture in a waste bucket and do not reuse it. Once the system is free of Isocyanates, you can purge it with a few quarts of Isocyanates and start spraying. Don't forget to add SurfaLube™ Equipment Storage Fluid to the lines when storing your equipment (up to 3 years). For immersion cleaning of mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam curing devices, holding tanks, feeding lines and mixing equipment, use the product at full strength at room temperature or a maximum temperature of 150 °F.
- FLUSHING, LOW-PRESSURE SPRAY FOR LARGE AMOUNTS OF HARDENED ISO (A) & REMOVING OVERSPRAY FROM UNPAINTED SURFACES
- FLUSHING POLYOL (B) & ALL OTHER URETHANE INTERMEDIATES
- IMMERSION CLEANING FOR RESIN & POLYMERS MAX OF 140 °F
- MEDIUM DENSITY
Available in a 5-gallon pail or 1-gallon jug. This product also comes in Go Green Wipes - 90 sheets.
GSP Surf X Flush: Go Green Wipes
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:5434:"
";}}}}}}
Surf X Flush 2000- Go Green Wipes - Pre- Saturated Wipes
SURF X FLUSH 2000 Polyurethane Foam, Resin & Coating Remover, Flushing large amounts of Hardened Isocyanate (A) and Polyol (B). For Immersion Cleaning of mixing heads, gear pumps, troughs, side walls, conveyor parts, rollers, molds, foam curing devices, holding tanks, feeding lines, and mixing equipment, use the product at full strength at room temperature or at a maximum temperature of 150°F. Go Green Wipes are used for quick hand wipe applications.
- 90 PRE-MOISTENED 12" X 12" POLYPROPYLENE WIPES WITH THE POWER OF GSP USA'S SOLVENTS
- QUICK, EASY, SAFE & EFFECTIVE WAY TO REMOVE SINGLE COMPONENT ISO (PART A & B) RIGID & MOLDED POLYURETHANE FOAM
- MDI & TDI ESTERS & ETHERS, CURED REACTIVE HOT MELT, POLYURETHANE ADHESIVES & OTHER INDUSTRIAL SOILS
- MIXTURES OF FIBERGLASS & POLYESTER RESIN, VINYLESTER & EPOXY RESINS
- WIPE OFF HOSES, BUILDUP OF MIXING HEADS, GEAR PUMPS, TROUGHS, SIDE WALLS, CONVEYOR PARTS, ROLLERS, MOLDS, FOAM CURING DEVICES, HOLDING TANKS, FEEDING LINES & MIXING EQUIPMENT
- PERFECT FOR USE IN SMALLER & CONFINED SPACE WORK AREAS
Proper Procedure:
- Pull out one pre-moistened wipe from the bucket and close dispenser with attached cover securely.
- Apply wipe on surface using circular motions to cover the area with solvent.
- If needed, leave wipe on overnight or until surface is cleaned.
- Discard the wipe in accordance with all local, regional, national, provincial, territorial and international regulations. Waste characterizations and compliance with applicable laws are solely the responsibility of the waste generator.
Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:1713:"
Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can
Extra powerful, time-saving formula cleans molds and tools with ease. Completely removes cured polyurethane, mold release, and other build-up from tooling, molds, and machinery. Use only on steel, aluminum and other metal tooling
Directions for Use
Recommended Procedure:
Wear rubber gloves and safety goggles to protect skin and eyes. Saturate the mold build-up with 8505 and allow to soak for about 8-10 hours. Soaking time may vary depending on the degree of build-up and temperature of mold. Allow 8505 to soak in until build-up easily wipes away with a rag or soft parts cleaning brush. Difficult areas may require a second application, 24hours of soaking, or scrubbing with soft cleaning brush or rag. Remove excess cleaner with a rag or allow to airdry. 8505 is a strong cleaner which may be harmful to certain plastics, paints, or other solvent sensitive materials. Always test for compatibility before using. Immediately after use, let 8505 evaporate from cloths or other applicators in a well-ventilated area, away from sources of ignition. Collect and dispose of material, rags, and applicators in metal containers in accordance with all local, state, and federal regulations.
Storage and Handling
8505 PolyOffâ„¢ Keep container tightly closed when not in use. Store in a cool, dry, well-ventilated area away from all sources of ignition. Avoid prolonged or repeated breathing of vapor. Avoid prolonged or repeated contact with skin. Use with adequate ventilation. Do not use near ignition sources. Consult SDS for additional safety information.
No reviews submitted.