Spray Foam Insulation Products

Shop by Brand, Category or Keyword

Allegro LP Low Pressure Cooling System-Cooler
0
(0)
$846.75

Allegro Low Pressure Cooling System-Cooler  (9820-LP)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allegro Model A-1500TE, Ambient Air Pump (1 1/2hp Motor)
0
(0)
$2,856.00

Allegro Model A-1500TE, Ambient Air Pump (1 1/2hp Motor)  (9832)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allegro One Worker Full Mask System w/ 50' Hose
0
(0)
$1,277.00

Allegro 1 Worker Full Mask System w/ 50' Hose

1-Worker Full Mask Breathing Air Blower Respirator System w/ 50' Hose, Allegro Industries 9200-01A. These provide a portable air source for one respirator user. They include one NIOSH approved full mask supplied air respirator, a blower, flow meter, and one 50 foot (15.2 m) breathing air hose. Includes NIOSH approved respirator.

Includes:

• Blower: 120V, 60 Hz, 3.8A.
• Face Mask Lens: High impact polycarbonate.
• Face Mask Suspension: Non-slip durable rubber five point harness.
• Face Mask Seal: Hypoallergenic and chemical/ozone resistant.
• Breathing Air Hose: Braided Vinyl, 50 Ft.


Allegro Personal Air Cooler
0
(0)
$215.25

Allegro Personal Air Cooler w/ Belt & Hansen Fitting  (9991)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allegro Pump Pressure Gauge
0
(0)
$65.50

Allegro Pressure Gauge  (9700-04)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allegro Replacement Lens
0
(0)
$83.00

Allegro Low Pressure Replacement Lens for 1 or 2 Man Fresh Air System (9901-09L)

  •  Clear Lens, 
  •  For Use With 9901 Full Face Respirators, 
  •   Compatible with Brand Allegro, 
  •   Replacement Lens Only


Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allegro Two Worker Double Bib Tyvek Hood Cold Air Respirator System
0
(0)
$5,500.75
Allegro Two Worker Double Bib Tyvek Hood Cold Air Respirator System

Allegro's Cold Air System is a portable fresh, refrigerated air supply system which provides comfortable and safe cooled breathing air for industrial users who require an OSHA compliant fresh air supply system, with the advantages of air-conditioned air. This cold-air supplied air respiratory system can maximize productivity and minimize the possibility of heat stroke, heat exhaustion, dehydration, nausea and cramps for your workers. While Allegro's Cold Air System improves the worker’s safety and comfort, it also helps reduce their frequency and duration of breaks on the job. This self-contained, low maintenance unit includes a removable, washable filter and is powder coated for a longer lasting durability.

includes:
  •  (2) Hoods
  •  (1) Cold Air Blower
  •  (2) 100' Breathing Air Hose

Motor/Construction:

  •  120V, 60 Hz
  •  10.5A
  •  CFM output regulated speed control
  •  Exterior manifold to allow for the use of multi-air lines (single/double)
  •  Control panel that allows for AC temperature and fan speed adjustments
  •  Powder coated finish for long lasting durability
  •  Unit is self-contained and requires little maintenance (exception of removable, washable filter)

Hood Specifications:

Made of a poly-coated Tyvek material, this hood offers the increased protection of two bibs. The inner bib tucks inside protective garments so air flows down for a cooling effect on the body, and the outer bib secures under the arms with hook and loop to keep the hood from rising up. The hood features an extra large lens for better visibility. It offers the same convenient design with the downtube and suspension built in, making the complete hood fully disposable. NIOSH approved.



Allegro Two Worker Full Face Mask Cold Air Respirator System
0
(0)
$5,613.00

Allegro Two Worker Full Face Mask Cold Air Respirator System

The Allegro Two Worker Cold Air Full Mask System is a portable fresh, refrigerated air supply system. This system provides comfortable and safe cooled breathing air for industrial users who require an OSHA compliant fresh air supply system, with the advantages of air-conditioned air. It can maximize productivity and minimize the possibility of heat stroke, heat exhaustion, dehydration, nausea and cramps for your workers. While this cold air system improves the worker's safety and comfort, it also helps reduce their frequency and duration of breaks on the job. This self-contained, low-maintenance unit includes a removable, washable filter and is powder-coated for a longer lasting durability.

includes

  •  (2) Full face masks
  •  (1) Cold air blower
  •  (2) 100ft. breathing air hose

Motor/Construction:

  •   120V, 60 Hz
  •   10.5A
  •   CFM output regulated speed control
  •   Exterior manifold to allow for the use of multi-air lines (single/double)
  •   Control panel that allows for AC temperature and fan speed adjustments
  •   Powder coated finish for long lasting durability
  •   Unit is self-contained and requires little maintenance (exception of removable, washable filter)

Full Face Mask Specifications:

Made of silicone rubber for better durability and will hold its shape even in extreme heat and cold. The double sealing flange provides an improved face-to-mask seal and a deep chin pocket provides a better, more comfortable fit. The replaceable polycarbonate lens offers a wider, distortion-free viewing area with an anti-fog, anti-scratch coating. The unique “over the shoulder” hose design clips at the collar and an adjustable belt holds the air hose out of the way of work. Includes NIOSH approved respirator(s).



Allegro Two Worker Pump Only Model A-750, Ambient Air Pump 3/4hp Motor
0
(0)
$1,286.25

Allegro Two Worker Pump Only Model A-750, Ambient Air Pump 3/4hp Motor  (9821)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allegro Two Worker Wall Air Filter Panel w/ AC/DC CO Monitor
0
(0)
$1,953.25

Allegro Two‐Worker Wall‐Air Filter Panel w/ AC/DC CO Monitor  (9872-40)

Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.


Allen Wrench Set, Qty: 3
0
(0)
$9.44
Allen Wrench Set/ Folding Hex Key Set, Qty: 3

AMP ConCote Polyurea Spray System, 100 gallon kit
0
(0)
ConCote is a rapid setting, 100% solids, flexible, aromatic two-component pure Polyurea. This odorless volatile-free elastomeric is specially designed to be applied to metal, Styrofoam (EPS), spray foam and tank lining membranes. ConCote gels in 10 seconds—it can be applied in single or multiple applications from 10 mils to 1,000 mils without the concern of sagging or running. ConCote offers a tack-free time of about 15 seconds and will not hydrolyze or contaminate other materials due to its inert nature. ConCote is moisture and temperature insensitive and will accommodate substrate movements while remaining strong. 

  •  This is sold in a 100 gallon kit.

AMP ConPrime Polyurea Spray System, 10 gallon kit
0
(0)

ConPrime is a two component, high solids, liquid applied primer with unique penetrating characteristics. It is designed to be used on porous substrates. ConPrime may be diluted to reduce viscosity and has a working time fo 45 minutes. ConPrime may be used with rapid curing polyurea sealants and spray coating systems and is designed for interior and exterior priming.

  •  This is sold in a 10 gallon kit.

ConPrime should be coated within 12 hours after it has become tack free. Not UV stable. Surfaces must be dry, clean and free of foreign matter. Containers that have been opened must be used as soon as possible. ConPrime is difficult to clean up after it has cured. Mix no more material than can be used within 20 minutes.


AMP ConPrime Polyurea Spray System, 2 gallon kit
0
(0)

ConPrime is a two component, high solids, liquid applied primer with unique penetrating characteristics. It is designed to be used on porous substrates. ConPrime may be diluted to reduce viscosity and has a working time fo 45 minutes. ConPrime may be used with rapid curing polyurea sealants and spray coating systems and is designed for interior and exterior priming. 

  •  This is sold in a 2 gallon kit.

ConPrime should be coated within 12 hours after it has become tack free. Not UV stable. Surfaces must be dry, clean and free of foreign matter. Containers that have been opened must be used as soon as possible. ConPrime is difficult to clean up after it has cured. Mix no more material than can be used within 20 minutes.


AMP GeoCote Polyurea Spray System, 100 gallon kit
0
(0)

AMP GeoCote is a rapid setting, 100% solids, flexible, aromatic two-component polyurea. This odorless volatile- free elastomeric is specially designed to be applied to various substrates including concrete, metal, geotextile and other lining membranes. GeoCote gels in 15 seconds—it can be applied in single or multiple applications without the concern of sagging. GeoCote offers a tack-free time of about 3 minutes and a low amount of stress shrinkage from curing, <0.7%. 

  •  This is sold in a 100 gallon kit. 


AMP HandCote Polyurea Spray System, 2 gallon kit
0
(0)

Handcote is a self-leveling, hand mix polyurea that is designed for small coating or patching applications. This material can be processed through non-heated plural component equipment if desired. It is ideal in applications where an elastomeric is desired and will accommodate substrate movement. This ambient curing material is great for low pressure spraying and can accommodate below freezing applications. 

  •  This is sold in a two gallon kit.


AMP MetCote Polyurea Spray System, 100 gallon kit
0
(0)

MetCote is a rapid setting, 100% solids, flexible, aromatic two-component pure Polyurea. This odorless volatilefree elastomeric is specially designed to be applied to metal, Styrofoam (EPS), spray foam and tank lining membranes. MetCote can be applied in single or multiple applications from 10 mils to 1,000 mils without the concern of sagging or running. MetCote will not hydrolyze or contaminate other materials due to its inert nature. MetCote is moisture and temperature insensitive and will accommodate substrate movements while remaining strong. 

  •  This is sold in a 100 gallon kit.


AMP PolyPrep Polyurea Spray System, 1 gallon kit
0
(0)

PolyPrep is a solvent based product designed to interact with existing coatings such as polyurea, plastics, or synthetic rubber materials to accept a new application of polyurea. It is great when needind to tie-in or recoat existing polyureas after the recoat window has closed. This product can be brush or spray applied and will flash off and allow for recoat within an hour. Polyprep is a single component product that does not use aromatic halogenated or non-halogenated solvents to bond old polyurea to new polyurea. 

  •  This is sold in a one gallon kit.