Allegro Full Face Respirator w/ LP Adapter
Allegro Full Face Respirator w/ LP Adapter
Full Mask SAR w/ LP Adapter (For use with Cold Air & Air Blower Systems)(Low Pressure)
Allegro partial SAR (supplied-air respirator) assemblies include parts required to build a full system or to replace worn parts on existing systems. SARs provide safe breathable air in low oxygen environments or where air quality is compromised. An airline hose connects a worker's facepiece to a supplied-air compressor. The mobility of the worker is limited to the length of the airline, but the compressor offers an unlimited amount of air.
| Weight | 907.18 grams |
If you have purchased the product, you can review it from the order details screen.
Related Products
Allegro Full Face High-Pressure Respirator
This offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way.
NIOSH approved.
Features and Specs:
LENS:
- High impact polycarbonate (meets ANSI Z87.1)
- Wide field of vision with distortion-free replaceable lens
- Anti-fog and anti-scratch coatings
- Available lens peel-offs (P/N: 9901-25)
SUSPENSION:
- Non-slip durable rubber five point harness w/mesh hairnet
- Fits under hard hats
- Unique adjustable buckle system to lock in place
SEAL:
- Hypoallergenic and chemical/Ozone resistant
- Durable silicone rubber maintains shape while in storage
- Comfortable even in extreme heat and cold environments
- Double sealing flange and deep chin pocket for better face to mask seal
EXHALATION VALVE:
- Large diameter contoured exhalation valve design.
- Easily accessible for fast replacement and cleaning
- Removable cover protects the exhalation valve form dirt, paint spray and from freezing
DOWN TUBE & BELT ASSEMBLY:
- 90 Degree elbow allows it to be directed over the shoulder and out of the way
- Corrugated flexible and lightweight material for greater comfort and less fatigue
- Three options available: Flow Control Valve (20-50psi)(1.38-3.45 bar), Personal Cooler (50-85 psi)(3.45-5.86 bar) or Temp Controller (55-105 psi)(3.79-7.24 bar)
- Low profile nylon adjustable waist belt, (Included with high pressure controllers)
- Plastic clip to restrain airline hose from pulling on the face piece
Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.
Allegro High Pressure SAR Full Mask w/ Personal Air Cooler
This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way.
Features and Specs:
LENS:
- High impact polycarbonate (meets ANSI Z87.1)
- Wide field of vision with distortion-free replaceable lens
- Anti-fog and anti-scratch coatings
- Available lens peel-offs (P/N: 9901-25)
SUSPENSION:
- Non-slip durable rubber five point harness w/mesh hairnet
- Fits under hard hats
- Unique adjustable buckle system to lock in place
SEAL:
- Hypoallergenic and chemical/Ozone resistant
- Durable silicone rubber maintains shape while in storage
- Comfortable even in extreme heat and cold environments
- Double sealing flange and deep chin pocket for better face to mask seal
EXHALATION VALVE:
- Large diameter contoured exhalation valve design, for minimal breathing resistance
- Easily accessible for fast replacement and cleaning
- Removable cover protects the exhalation valve form dirt, paint spray and from freezing
DOWN TUBE & BELT ASSEMBLY:
- 90 Degree elbow allows it to be directed over the shoulder and out of the way
- Corrugated flexible and lightweight material for greater comfort and less fatigue
- Three options available: Flow Control Valve (20-50psi)(1.38-3.45 bar), Personal Cooler (50-85 psi)(3.45-5.86 bar) or Temp Controller (55-105 psi)(3.79-7.24 bar)
- Low profile nylon adjustable waist belt, (Included with high pressure controllers)
- Plastic clip to restrain airline hose from pulling on the face piece
Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.
Allegro Full Face Low Pressure Respirator
Allegro Full Face Respirator w/ LP Adapter
Allegro Full Face Respirator w/ LP Adapter
Full Mask SAR w/ LP Adapter (For use with Cold Air & Air Blower Systems)(Low Pressure)
Allegro partial SAR (supplied-air respirator) assemblies include parts required to build a full system or to replace worn parts on existing systems. SARs provide safe breathable air in low oxygen environments or where air quality is compromised. An airline hose connects a worker's facepiece to a supplied-air compressor. The mobility of the worker is limited to the length of the airline, but the compressor offers an unlimited amount of air.
Allegro Full Face Peel Offs, 25 pk
Allegro 9901-25 Cover Lens - Respirator Cover Lens Peel Offs (25/PKG)
Lens Cover, For Use With Full Mask Supplied Air Respirator, Package Quantity 25
Features and Specs:
- For Use With Full Mask Supplied Air Respirator
- sold by package of 25
Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.
No reviews submitted.