Accufoam AF1 Open Cell Insulation Foam
Accufoam AF1 is a two-component, one-by-one-by-volume spray-applied polyurethane foam. Accufoam AF1 is a
high-yield, low-density, no-mix, spray-applied insulation foam, which contains zero ozone-depleting blowing agents
and is designed to provide good thermal performance and a significant control of air infiltration of an air-barrier
assembly. Accufoam AF1 is 100% water blown.
JM Corbond®
Open-cell Spray Polyurethane Foam (Open Cell SPF) insulation is a two component, low-density, Class 1 rated, nonstructural insulation system designed for
interior commercial, residential and industrial applications. JM Corbond Open Cell SPF is
100% water blown. Its high yield, superior performance, and exceptional sprayability
make it an ideal choice for high-performing energy efficient buildings.
JM Corbond®
III closed-cell spray polyurethane foam (SPF) is a premium, two component, medium-density, Class 1 rated, insulation system designed for
commercial, residential and industrial applications. Its high yield, superior thermal
and moisture performance, and exceptional sprayability and adhesion make it an
ideal choice for high-performing energy efficient buildings.
JM Corbond IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two component, Class 1 rated, medium density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential and industrials buildings. The HFO Technology allows JM Corbond IV to be produced with low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.
11-037 InsulBloc SmartSPF is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBlock SmartSPF insulation system is suitable for application on the exterior or interior side of Type I, Type II, Type III, IV and V building walls as well as other insulation applications.
Temperature Range Guideline: 40 degrees - 80 degrees F
NCFI Enduratech 2.8# HFC Roofing Foam
NCFI 10-011 is a two component, HFC-245fa blown, all PMDI based spray polyurethane foam system
designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing
system. 10-011 is available in multiple speeds for use in varying temperature conditions. 10-011 complies
with ASTM D7425 and has been formulated to spray at a 2.8 pound density, depending on lift thickness, and
may be used in applications of the EnduraTech™ roofing systems.
NCFI Enduratech 3.0# HFC Roofing Foam
NCFI 10-011 is a two component, HFC-245fa blown, all PMDI based spray polyurethane foam system
designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing
system. 10-011 is available in multiple speeds for use in varying temperature conditions. 10-011 complies
with ASTM D7425 and has been formulated to spray at a 3.0 pound density, depending on lift thickness, and
may be used in applications of the EnduraTech™ roofing systems.
