a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:1091:"<b>Armor Coat Armor Putty, 2 Gallon Pail </b>**All items may be subject to quantity and color restrictions. Please contact the office for availability.**<div><br></div><div>AC Armor Putty is a premium quality patching compound manufactured using some of the industries most advanced, highest quality, water-based, non-toxic, 100% acrylic polymer resins. It is a high solids, water-based sealant which, once fully cured, provides a water resistant and extremely flexible membrane. 2 gallon pail.</div><div><br></div><div><b>Recommended Uses:</b></div><div>ARMOR PUTTY can be applied by brush, trowel or hand to gaps on abutting substrates as well as filling cracks on parapet walls, protrusions, joints, fasteners, flashing and seams. It may also be used in conjunction with polyester fabric to three course areas of the roof that may require additional reinforcement. Consult with the manufacturer for any/all application specific recommendations prior to starting your install.</div><div><br></div><div><b>Color:</b></div><div><ul><li>White Only</li></ul></div><div><div><br></div></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:608:"<p>PolyPrep is a solvent based product designed to interact with existing coatings such as polyurea, plastics, or synthetic rubber materials to accept a new application of polyurea. It is great when needind to tie-in or recoat existing polyureas after the recoat window has closed. This product can be brush or spray applied and will flash off and allow for recoat within an hour. Polyprep is a single component product that does not use aromatic halogenated or non-halogenated solvents to bond old polyurea to new polyurea.&nbsp;</p><p><p><ul><li>This is sold in a one gallon kit.</li></ul></p></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:943:"<b>General Coatings Ultra-Flex 1000 Butter Grade Putty/Mastic, 3.5 gal pail </b><i>**All items may be subject to quantity and color restrictions. Please contact the office for availability.**</i><div><i><br></i></div><div>GC Ultra-Flex 1000 is a high-solids, UV resistant, single-component waterborne acrylic elastomeric mastic ideal for 3 coursing with reinforcing polyester fabrics. Ultra-Flex 1000 Butter Grade can be used to seal and watertight irregular roof penetrations, seams, and terminations. Ultra-Flex 1000 Butter Grade is formulated to have excellent adhesion, ease of application, dirt pickup resistance, fungus &amp; mildew growth resistance, low temperature flexibility and non-flammable. 3.5 gallon pail.</div><div><br></div><div><b>Recommended Uses:</b></div><div><ul><li>Polyurethane Roof Foam</li><li>Acrylic Recoat</li><li>Roof Sealant</li><li>BUR Restoration</li></ul><b>Color:</b></div><div><ul><li>White</li></ul></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:1108:"<b>Armor Coat Armor Prime Primer, 5 Gallon Pail</b> <i>**All items may be subject to quantity and color restrictions. Please contact the office for availability.**</i><div><i><br></i></div><div><i></i>Armor Prime is a<i>&nbsp;s</i>ingle component clear, weatherproof, elastomeric penetrating sealer. It provides good penetration of porous substrates both above and below grade. ARMORPRIME also improves adhesion to many substrates including, but not limited to BUR modified bitumen, concrete, masonry, galvanized metal, wood decking as well as previously sprayed polyurethane foam. 5 gallon pail.</div><div><br></div><div><b>Additional Uses:</b></div><div>When purchased in black form ARMORPRIME helps to speed up the burn off of dew in the morning by increasing the deck temperature as well as increases the exothermic reaction of sprayed in-place polyurethane foam which can increase your overall yield. </div><div><b><br></b></div><div><b>Color:</b></div><div><p></p><ul><li>White (Clear after drying)</li><li>Gray (Black after drying)</li></ul><p></p></div><div><b><br></b></div><div><b></b><i></i></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:1227:"<b>Armor Coat 60 Acrylic, 5 Gallon Pail </b>**All items may be subject to quantity and color restrictions. Please contact the office for availability.**<div><br></div><div>Armor Coat 60 is a manufactured using one of the industries most advanced, highest quality, water-based, non-toxic, 100% acrylic polymer resins available today. It was developed primarily for use directly over spray in-place polyurethane foam due to its excellent adhesive qualities as well as its superior reflectivity making it extremely UV resistant to protect your roof from the intense heat and the sun’s damaging ultraviolet rays. 5 gallon pail.</div><div><br></div><div><b>Recommended Uses:</b></div><div>While AC 60 was originally designed for use over spray in-place polyurethane foam, it is an excellent choice for many other substrates, including, but not limited to metal, asphalt emulsion, masonry, asphalt shingles, cap sheet, plywood and concrete. In some cases, a primer/basecoat may be required. Consult with manufacturer for any/all application specific recommendations prior to starting your install. <br></div><div><b><br></b></div><div><b>Color:</b><br></div><div><p></p><ul><li>White</li><li>Gray</li><li>Tan</li></ul><p></p></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:957:"<b>General Coatings Ultra-Flex 1000 Acrylic, 5 gallon pail</b> <i>**All items may be subject to quantity and color restrictions. Please contact the office for availability.**</i><div><i><br></i></div><div>GC Ultra-Flex 1000 is high-solids, UV resistant, single-component water-borne acrylic elastomeric top coating. Ultra-Flex 1000 has excellent thermal conductivity performance, fungus &amp; mildew growth resistance as an ASTM D6083, and is a CRRC compliant roof coating. Ultra-Flex 1000 is formulated to have excellent adhesion, ease of application, dirt pickup resistance and low temperature flexibility. 5 gallon pail.</div><div><br></div><div><b>Recommended Uses:</b></div><p></p><ul><li>Polyurethane Roof Foam</li><li>Acrylic Recoat</li><li>Top coat over polyurethane base</li></ul><b>Color:</b><p></p><p></p><p></p><ul><li>White</li><li>Off White</li><li>Light Gray</li><li>Light Tan</li><li>Medium Gray</li></ul><p></p><p><br></p><p><b><br></b></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:1246:"<b>Armor Coat 100 Acrylic, 5 Gallon Pail</b> **All items may be subject to quantity and color restrictions. Please contact the office for availability.**<div><br></div><div>Armor Coat 100 is manufactured using one of the industries most advanced, highest quality, water-based, non-toxic, 100% acrylic polymer resins available today. AC 100 was developed primarily for use directly over spray in-place polyurethane foam due to its excellent adhesive qualities as well as its superior reflectivity making it extremely UV resistant to protect your roof from the intense heat and the sun’s damaging ultraviolet rays. 5 gallon pail.</div><div><br></div><div><b>Recommended Uses:</b></div><div>While AC 100 was originally designed for use over spray in-place polyurethane foam, it is an excellent choice for many other substrates, including, but not limited to metal, asphalt emulsion, masonry, asphalt shingles, cap sheet, plywood and concrete. In some cases, a primer/basecoat may be required. Consult with manufacturer for any/all application specific recommendations prior to starting your install. </div><div><br></div><div><b>Color:</b></div><div><p><ul><li>White</li><li>Gray</li><li>Tan</li></ul></p></div><div><b><br></b></div><div></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:876:"<b>General Coatings Ultra-Bond 10 Primer, 5 gallon pail </b><i>**All items may be subject to quantity and color restrictions. Please contact the office for availability.**</i><div><br></div><div>GC Ultra Bond-10 is a w<b></b>aterborne modified acrylic neoprene asphalt primer specifically designed as a substrate primer before the application of spray polyurethane foam. When applied in a thin layer (3-4 mils) applied to polyurethane foam, provides short-term protection from the elements and an excellent surface for bonding of additional urethane foam. 5 gallon pail.</div><div><br></div><div><b>Recommended Uses:</b></div><div><p></p><ul><li>Plywood</li><li>Ferrous Metal</li><li>BUR</li><li>Concrete</li><li>Polyurethane Foam</li></ul><p></p><p><b>Color:</b></p><p></p><ul><li>Black</li></ul><p></p><div><b><br></b></div><div><b><br></b></div><div><b><br></b></div></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:780:"<p>ConPrime is a two component, high solids, liquid applied primer with unique penetrating characteristics. It is designed to be used on porous substrates. ConPrime may be diluted to reduce viscosity and has a working time fo 45 minutes. ConPrime may be used with rapid curing polyurea sealants and spray coating systems and is designed for interior and exterior priming.&nbsp;</p><p><ul><li>This is sold in a 2 gallon kit.</li></ul></p><p>ConPrime should be coated within 12 hours after it has become tack free. Not UV stable. Surfaces must be dry, clean and free of foreign matter. Containers that have been opened must be used as soon as possible. ConPrime is difficult to clean up after it has cured. Mix no more material than can be used within 20 minutes.<br></p>";}}}}}}