This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way.
Features and Specs:
LENS:
SUSPENSION:
SEAL:
EXHALATION VALVE:
DOWN TUBE & BELT ASSEMBLY:
Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.
Allegro part number 9700-01 is an Inlet Filter Element that fits Allegro ambient air pumps A300, A750, A1500TE, and A1500EX. Allegro Industries recommends changing the filters on your breathable air pump after every 200 hours of operation. In areas with lots of airborne particulate matter, the filters may need to be changed more often.
Product compatible with:
Allegro Low Pressure Flow Adapter w/ Belt & OBAC Fitting (9910-11)
For use with a low pressure supplied air respirator. Our Low Pressure Flow Adapter allows the hood to connect to an breathing air pump or any low-pressure air source.
Allegro Personal Air Cooler-9991
Vortex Tubes are an effective, low-cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot air streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. A fraction of the hot air is discharged at the control valve. The remainder of the slower air stream is forced to counter-flow up through the center of the high-speed air stream, giving up heat, through the center of the generation chamber finally exiting through the opposite end as extremely cold air.
CONSTRUCTION: Body: Aluminum Fitting: Hansen 1/4” (0.63 cm) plug (series 1000) Stainless Steel Belt: Nylon
BENEFITS: • Uses filtered compressed air • Provides continuous cool air delivery • Easy temperature adjustment even with gloved hands • No moving parts • Exceptionally reliable • A control valve allows for temperature adjustment • Will cool compressed air by 25° F (-3.9° C) • Requires an air supply pressure range from 50 -115 psi
Allegro Pressure Gauge 9700-04 for A-300 & A-750 Pump
Allegro Low Pressure Replacement Lens for 1 or 2 Man Fresh Air System (9901-09L)
Motor/Construction:
Hood Specifications:
Made of a poly-coated Tyvek material, this hood offers the increased protection of two bibs. The inner bib tucks inside protective garments so air flows down for a cooling effect on the body, and the outer bib secures under the arms with hook and loop to keep the hood from rising up. The hood features an extra large lens for better visibility. It offers the same convenient design with the downtube and suspension built in, making the complete hood fully disposable. NIOSH approved.
Allegro Two Worker Wall Air Filtration Panel with CO Monitor
Our Wall-Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8+ airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada).
The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. Available with and without CO monitors. All models meet NIOSH requirements for point-of-attachment.
AllegroAir High Pressure Airline Cooling System
Designed for greater user comfort and increased worker productivity, the portable AllegroAir Airline Cooling System is the perfect solution to cool high pressure breathing air at a reduced cost. High pressure breathing air produced by air sources such as an air filtration panel or compressor cannot exceed 150 psi (10.34 bar). This lightweight yet highly effective cooling system is capable of reducing the breathing air temperature from 180º F (82.22° C) to as low as 50º F (10° C)!
NOTE: panel sold separately
Dimensions: 20″w x 21″l x 24″h
Weight: 28 lbs. (without ice)
Allegro Low Pressure Airline Cooling System-Cooler Only
Designed for greater user comfort and increased worker productivity, the portable Allegro Air Airline Cooling System is the perfect solution to cool low pressure breathing air at a reduced cost. This lightweight yet highly effective cooling system is capable of reducing the breathing air temperature from 180º F (82.22° C) to as low as 50º F (10° C)!
NOTE: pump sold separately
Dimensions: 20”w x 21”d x 24”h
Weight: 28 lbs. (without ice)
The North 5400 Series Full Facemask Respirator provides the comfort and protection you would expect from North, weighing only 14 ounces lightweight design offers a level of comfort that ensures greater worker acceptance. Plus, its facepiece seal is made from a soft, pliable elastomer material with high chemical resistance to assure excellent comfort, fit and performance. Features and Specs: Can be adapted to PAPR or Supplied Air Available with welding adapter economically priced without sacrificing quality. All parts are replaceable, Many replacement parts interchangeable with the 7600 Series mask. Wide sealing area Nose cup is standard Chin cup helps to position the facepiece properly, latex free lens offers 200-degree field of vision, plus downward view Polycarbonate lens meets ANSI high impact requirements.