NCFI InsulBloc Optimaxx 2.0# HFO Winter Closed Cell Foam

11-037 InsulBloc SmartSPF is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBlock SmartSPF insulation system is suitable for application on the exterior or interior side of Type I, Type II, Type III, IV and V building walls as well as other insulation applications.

Cold Weather Foam. Temperature Range Guideline: 10 degrees - 50 degrees F

NCFI Enduratech Acrylic R Coating, 55 gal Drum

NCFI Enduratech® R (70-012) is a durable 100% acrylic elastomeric coating designed specifically for use over new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.

Installation:

May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
Apply at temperatures above 50°F.
Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing

NCFI Enduratech Acrylic Coatings, 55 gal drum

NCFI EnduraTech® Q (70-014) is a durable 100% acrylic elastomeric coating designed specifically for use over new spray polyurethane foam (SPF) roofing systems, or for recoating existing SPF roofing systems.

Installation:

May be applied by spray or heavy nap roller. However, airless spray is recommended for consistency.
All surfaces must be clean, dry, and free of dirt, grease, oil, and other contaminants that would interfere with proper adhesion.
Apply in two separate coats at the minimum rate of one gallon per 100 square feet.
Apply at temperatures above 50°F.
Apply only when Weather conditions will permit coating to dry before rain, dew, or freezing temperatures occur.

NCFI AgriThane 2.0# HFO Closed Cell Regular Foam

11-035 AgriThane is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam insulation system. This system has been formulated with highly insulating HFO as the blowing agent. 11-035 system is suitable for application on tanks and temperature controlled structures, and for air sealing structures as part of the NCFI AgriThane insulation system.

NCFI Open Cell Foam-12-008

InsulStar® Light 12-008 is a two component, one-to-one by volume, no-mix, self-adhering, seamless spray applied open-cell polyurethane insulation system. InsulStar® Light has been formulated with water as the blowing agent and does not contain CFC, HCFC, HFC or formaldehyde. InsulStar® Light is suitable for use in Type I, II, III, IV & V construction.

NCFI Terrathane 24-024 Dual Component Polyurethane

TerraThane™ 24-024 is a 2lb hydrophobic / hydroinsensitive, MDI-based, water blown system that is formulated for exceptional spread and lifting capacity. The 24-024F’s hydrophobic nature allows it to maintain exceptional physical properties even in saturated conditions.

NCFI Terrathane 24-010 Dual Component Polyurethane

TerraThane™ 24-010 is a 2.8lb water blown, MDI-based geotechnical polyurethane formulated for quick expansion and pinpoint control for lifting and leveling. 24-010 is available with an NSF/ ANSI 61 Section 5 –2017 certification

NCFI Strata-Fill Low Exotherm Polyurethane System

Strata-Fill™ 24-070 is a two-component, HF0 blown, low-exotherm polyurethane system. 24-070 offers slow reactivity for greater flow, making it ideal for filling large void areas, pipe abandonment, and underground tank abandonment.

NCFI Terrathane 24-044 Dual Component Polyurethane

TerraThane™ 24-044 is a 3.0lb hydrophobic / hydroinsensitive, MDI-based, water blown system formulated for excellent expansion and pinpoint control for structural lifting and leveling. The 24-044’s hydrophobic nature allows it to maintain exceptional physical properties even in saturated conditions. Available with NSF/ANSI 61 Section 5 – 2017 certification.

NCFI Strata-Fill 24-039 Low Exotherm Polyurethane System

Strata-Fill™ 24-039 is a hydrophobic / hydro-insensitive two-component, HFO blown, low-exotherm polyurethane system. 24-039 offers slow reactivity for greater flow, making it ideal for filling large void areas, pipe abandonment, and underground tank abandonment.

NCFI Terrathane 24-003 Dual Component Polyurethane

TerraThane 24-003 is a 4 lb hydrophobic/ hydro insensitive, MDI based, water blown system that is designed for exceptional spread and lifting capacity The hydrophobic nature of 24-003 allows it to maintain exceptional physical properties even in saturated conditions. Available with NSF/ANSI 61 Section 5 -2017 certification

NCFI Terrathane 24-042 Dual Component Polyurethane

TerraThane™ 24-042 is a 3.5lb water blown, MDI-based, hydrophobic / hydro-insensitive geotechnical polyurethane formulated for exceptional spread and lifting capacity. The hydrophobic nature of 24-042 allows it to maintain exceptional physical properties even in saturated conditions. Available with NSF/ANSI 61 Section 5 – 2017 certification.

NCFI Strata-Fill 24-023 Low Exotherm Polyurethane System

Strata-Fill™ 24-023 is a two-component, HFO blown, MDI based, low-density, low exotherm polyurethane system formulated for void fill or trench-break applications. 24-023 has been formulated to process at 2.0-2.2 PCF, depending on lift thickness, without scorching or splitting.

NCFI InsulStar Optimaxx 1.7# HFO Closed Cell Foam- Temperature Range Guidelines: 40 -80 degrees

11-033 InsulStar®1.7 OPTIMAXX is a two component, self-adhering, seamless, closed cell, spray applied polyurethane foam system. This system has been formulated with a highly insulating HFO as the blowing agent. The InsulStar®1.7 OPTIMAXX insulation system is suitable for application on the interior building envelope of Type I, II, III, IV, & V buildings as well as other insulation applications.

NCFI InsulStar Optimaxx 1.7# HFO Fast/Winter Closed Cell Foam-Temperature Range Guidelines: 10-50 degrees

NCFI InsulBloc Optimaxx 2.0# HFO Closed Cell Foam

Temperature Range Guideline: 40 degrees - 80 degrees F

NCFI Enduratech 2.8# HFO Roofing Foam

NCFI 10-016 is a two component, HFO blown spray polyurethane foam system designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing system. 10-016 is available in multiple speeds for use in varying temperature conditions. 10-016 complies with ASTM D7425 and has been formulated to spray at a 2.8 pound density, depending on lift thickness, and may be used in applications of the EnduraTech® roofing systems.

MORE PAGES

TESTIMONIALS

Related Products of NCFI InsulStar Optimaxx 1.7# HFO Closed Cell Foam

MORE PAGES

TESTIMONIALS