Related Products of Dynasolve CU-6 1g
TSL-Throat Seal Liquid/Pump Lube, 1 Gallon
TSL-Throat Seal Liquid/Pump Lube, 1 Gallon
Throat Seal Liquid (TSL) prevents paint and coatings from drying onto the displacement rod and packings, extending the life of the pump.
- Sold in 1 gallon Jug
GSP Surf A Lube: 1-Gallon Jug
- USED IN SPRAY EQUIPMENT FOR MID TO LONG TERM STORAGE UP TO 36 MONTHS
- USED IN TRANSFER PUMPS, HOSES, PROPORTIONERS & GUNS
- ALSO ACTS AS A PLASTICIZER, PREVENTING ISO (A) FROM FORMING CRYSTALS
- IDEAL FOR WINTERIZING RIGS & CAN WITHSTAND SEVERE COLD TEMPS WITHOUT FREEZING
- VOC EXEMPT, NON-FLAMABLE & NON-CORROSIVE
GSP Surf A Lube: 5-Gallon Pail
- USED IN SPRAY EQUIPMENT FOR MID TO LONG TERM STORAGE UP TO 36 MONTHS
- USED IN TRANSFER PUMPS, HOSES, PROPORTIONERS & GUNS
- ALSO ACTS AS A PLASTICIZER, PREVENTING ISO (A) FROM FORMING CRYSTALS
- IDEAL FOR WINTERIZING RIGS & CAN WITHSTAND SEVERE COLD TEMPS WITHOUT FREEZING
- VOC EXEMPT, NON-FLAMABLE & NON-CORROSIVE
GSP Surf X Flush: 1-Gallon Jug
- FLUSHING, LOW-PRESSURE SPRAY FOR LARGE AMOUNTS OF HARDENED ISO (A) & REMOVING OVERSPRAY FROM UNPAINTED SURFACES
- FLUSHING POLYOL (B) & ALL OTHER URETHANE INTERMEDIATES
- IMMERSION CLEANING FOR RESIN & POLYMERS MAX OF 140 °F
- MEDIUM DENSITY
GSP Surf X Flush: 5-Gallon Pail
- FLUSHING, LOW-PRESSURE SPRAY FOR LARGE AMOUNTS OF HARDENED ISO (A) & REMOVING OVERSPRAY FROM UNPAINTED SURFACES
- FLUSHING POLYOL (B) & ALL OTHER URETHANE INTERMEDIATES
- IMMERSION CLEANING FOR RESIN & POLYMERS MAX OF 140 °F
- MEDIUM DENSITY
GSP Surf X Flush: Go Green Wipes
- 90 PRE-MOISTENED 12" X 12" POLYPROPYLENE WIPES WITH THE POWER OF GSP USA'S SOLVENTS
- QUICK, EASY, SAFE & EFFECTIVE WAY TO REMOVE SINGLE COMPONENT ISO (PART A & B) RIGID & MOLDED POLYURETHANE FOAM
- MDI & TDI ESTERS & ETHERS, CURED REACTIVE HOT MELT, POLYURETHANE ADHESIVES & OTHER INDUSTRIAL SOILS
- MIXTURES OF FIBERGLASS & POLYESTER RESIN, VINYLESTER & EPOXY RESINS
- WIPE OFF HOSES, BUILDUP OF MIXING HEADS, GEAR PUMPS, TROUGHS, SIDE WALLS, CONVEYOR PARTS, ROLLERS, MOLDS, FOAM CURING DEVICES, HOLDING TANKS, FEEDING LINES & MIXING EQUIPMENT
- PERFECT FOR USE IN SMALLER & CONFINED SPACE WORK AREAS
Proper Procedure:
- Pull out one pre-moistened wipe from the bucket and close dispenser with attached cover securely.
- Apply wipe on surface using circular motions to cover the area with solvent.
- If needed, leave wipe on overnight or until surface is cleaned.
- Discard the wipe in accordance with all local, regional, national, provincial, territorial and international regulations. Waste characterizations and compliance with applicable laws are solely the responsibility of the waste generator.
Tytan Professional Can Foam Cleaner
Tytan Professional Can Foam Cleaner
A multi-use product designed for removing uncured polyurethane foams or adhesives. It is useful for cleaning of can valves and PU-foam gun applicators. The cleaner is excellent for degreasing metal surfaces before application of silicones and polyurethane. The Cleaner is manufactured in compliance with requirements of ISO 9001:2008 standard.
- Gun & Spray Nozzle
- Removes Uncured Foam
- Clear in Color
- 12-oz Can
- Sold Individually
Dissolving only uncured one-component PU-foams and adhesives. Cleaner has a destructive effect on the polystyrene, PVC and some other plastics, before use, test the cleaner on a given surface.
Cirr D Bond: 1-Gallon Jug
- ONLY IMMERSION CLEANING FOR BUILD UP OF HARDENED ISO(A) & INDUSTRIAL RESINS AT A MAX OF 140 °F
- SAFE ON ALL FERROUS & NON-FERROUS METALS
- DENSER & MORE AGGRESSIVE FORMULA
Cirr D Bond: 5-Gallon Pail
- ONLY IMMERSION CLEANING FOR BUILD UP OF HARDENED ISO(A) & INDUSTRIAL RESINS AT A MAX OF 140 °F
- SAFE ON ALL FERROUS & NON-FERROUS METALS
- DENSER & MORE AGGRESSIVE FORMULA
Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can
Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can
Extra powerful, time-saving formula cleans molds and tools with ease. Completely removes cured polyurethane, mold release, and other build-up from tooling, molds, and machinery. Use only on steel, aluminum and other metal tooling
Directions for Use
Recommended Procedure:
Wear rubber gloves and safety goggles to protect skin and eyes. Saturate the mold build-up with 8505 and allow to soak for about 8-10 hours. Soaking time may vary depending on the degree of build-up and temperature of mold. Allow 8505 to soak in until build-up easily wipes away with a rag or soft parts cleaning brush. Difficult areas may require a second application, 24hours of soaking, or scrubbing with soft cleaning brush or rag. Remove excess cleaner with a rag or allow to airdry. 8505 is a strong cleaner which may be harmful to certain plastics, paints, or other solvent sensitive materials. Always test for compatibility before using. Immediately after use, let 8505 evaporate from cloths or other applicators in a well-ventilated area, away from sources of ignition. Collect and dispose of material, rags, and applicators in metal containers in accordance with all local, state, and federal regulations.
Storage and Handling
8505 PolyOffâ„¢ Keep container tightly closed when not in use. Store in a cool, dry, well-ventilated area away from all sources of ignition. Avoid prolonged or repeated breathing of vapor. Avoid prolonged or repeated contact with skin. Use with adequate ventilation. Do not use near ignition sources. Consult SDS for additional safety information.
Stoner Anti Stick Coating-1 Can
