Related Products of Allegro Replacement Lens
Allegro Bayonet Connector
Allegro Bayonet Connector 9901-11A for Full Mask Air Respirator
";}}}}}}Allegro Bayonet Connector Gasket
Allegro Bayonet Connector Gasket 9901-11B for Full Mask Air Respirator
";}}}}}}Allegro Bayonet Connector Cover
Allegro Bayonet Connector Cover 9901-11C for Full Mask Air Respirator
";}}}}}}Allegro Low Pressure Flow Adapter w/ Belt & OBAC Fitting
Allegro Low Pressure Flow Adapter w/ Belt & OBAC Fitting (9910-11)
For use with a low pressure supplied air respirator. Our Low Pressure Flow Adapter allows the hood to connect to an breathing air pump or any low-pressure air source.
- Body: Plastic threaded fitting
- Fitting: OBAC
- Belt: Nylon with clip assembly
Allegro Wall-Air Two Worker Filtration Panel
Allegro Two Worker Wall Air Filtration Panel with CO Monitor
Our Wall-Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8+ airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada).
The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. Available with and without CO monitors. All models meet NIOSH requirements for point-of-attachment.
";}}}}}}Allegro Replacement High Pressure Full Face Mask Supplied Air Respirator
Allegro Replacement High Pressure Full Face Mask Supplied Air Respirator
This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way. NIOSH approved (TC-19C-437)
LENS:
• High impact polycarbonate (meets ANSI Z87.1)
• Wide field of vision with distortion-free replaceable lens
• Anti-fog and anti-scratch coatings
• Optional lens peel-offs available (PN 9901-25)
SUSPENSION:
• Non-slip durable rubber five-point harness w/ mesh hairnet
• Fits under hard hats
• Unique adjustable buckle system to lock in place
SEAL:
• Hypoallergenic and chemical/Ozone resistant
• Durable silicone rubber maintains shape while in storage
• Comfortable even in extreme heat and cold environments
• Double sealing flange and deep chin pocket for better face to mask seal
EXHALATION VALVE:
• Large diameter contoured exhalation valve design for minimal breathing resistance
• Easily accessible for fast replacement and cleaning
• Removable cover protects the exhalation valve form dirt, paint spray, and from freezing
DOWNTUBE & BELT ASSEMBLY:
• 90° elbow allows it to be directed over the shoulder and out of the way
• Corrugated flexible and lightweight material for greater comfort and less fatigue
• Three options available: o Flow Control Valve (20-50 psi) (1.38-3.45 bar) o Personal Cooler (50-85 psi) (3.45-5.86 bar) o Temp Controller (55-105 psi) (3.79-7.24 bar)
• Low profile nylon adjustable waist belt (included with high pressure controllers)
• Plastic clip to restrain airline hose from pulling on the face piece
";}}}}}}Allegro High Pressure Full Mask w/ Personal Air Cooler
Allegro High Pressure SAR Full Mask w/ Personal Air Cooler
This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way.
LENS:
- High impact polycarbonate (meets ANSI Z87.1)
- Wide field of vision with distortion-free replaceable lens
- Anti-fog and anti-scratch coatings
- Available lens peel-offs (P/N: 9901-25)
SUSPENSION:
- Non-slip durable rubber five point harness w/mesh hairnet
- Fits under hard hats
- Unique adjustable buckle system to lock in place
SEAL:
- Hypoallergenic and chemical/Ozone resistant
- Durable silicone rubber maintains shape while in storage
- Comfortable even in extreme heat and cold environments
- Double sealing flange and deep chin pocket for better face to mask seal
EXHALATION VALVE:
- Large diameter contoured exhalation valve design, for minimal breathing resistance
- Easily accessible for fast replacement and cleaning
- Removable cover protects the exhalation valve form dirt, paint spray and from freezing
DOWN TUBE & BELT ASSEMBLY:
- 90 Degree elbow allows it to be directed over the shoulder and out of the way
- Corrugated flexible and lightweight material for greater comfort and less fatigue
- Three options available: Flow Control Valve (20-50psi)(1.38-3.45 bar), Personal Cooler (50-85 psi)(3.45-5.86 bar) or Temp Controller (55-105 psi)(3.79-7.24 bar)
- Low profile nylon adjustable waist belt, (Included with high pressure controllers)
- Plastic clip to restrain airline hose from pulling on the face piece
Allegro Personal Air Cooler
Allegro Personal Air Cooler-9991
Vortex Tubes are an effective, low-cost solution to respiratory cooling needs. With no moving parts, a vortex tube spins compressed air to separate the air into cold and hot air streams by forcing the compressed air through a generation chamber which spins the air centrifugally along the inner walls at a high rate of speed toward the control valve. A fraction of the hot air is discharged at the control valve. The remainder of the slower air stream is forced to counter-flow up through the center of the high-speed air stream, giving up heat, through the center of the generation chamber finally exiting through the opposite end as extremely cold air.
CONSTRUCTION: Body: Aluminum Fitting: Hansen 1/4” (0.63 cm) plug (series 1000) Stainless Steel Belt: Nylon
BENEFITS: • Uses filtered compressed air • Provides continuous cool air delivery • Easy temperature adjustment even with gloved hands • No moving parts • Exceptionally reliable • A control valve allows for temperature adjustment • Will cool compressed air by 25° F (-3.9° C) • Requires an air supply pressure range from 50 -115 psi
";}}}}}}Allegro Adjustable Flow Control Valve w/ Belt & Hansen Fitting
Allegro Adjustable Flow Control Valve w/ Belt & Hansen Fitting (9992)
Spray Foam Equipment and Parts distributed by Profoam Corporation in Rutledge, GA, near Atlanta. Ships anywhere. Call 706-557-1400.
Allegro Full Face Peel Offs, 25 pk
Allegro Full Face Peel Offs, 25 pk
These clear Polyester lens peel offs help protect your respirator mask’s viewing area from dust, splash, and debris. They are intended for use with our Full-Mask Respirator (PN 9901). They are disposable and easily attaches to the facemask with peel-off adhesive strips. Available in packs of 25.
MATERIAL:
• Polyester
• .007 thickness
SIZE:
• 11” (27.9 cm) long x 4.75” (12.1 cm) wide
";}}}}}}Allegro Full Mask Storage Bag
";}}}}}}
Allegro 8" x 25' Standard Ducting
Allegro 8" x 25' Standard Ducting
This product is lightweight, retractable, and designed for maximum air handling capabilities. Dual direction flow with minimum friction loss.
CONSTRUCTION: • Vinyl and polyester materials • Single-Ply • PVC-coated • Temperature Range: -20° F to 180° F (-28.8° C to 82.22° C) • Retractable, non-collapsible design • Class 1 hard drawn spring steel wire helix • Meets ASTM 227 specs • Meets flame retardant requirements of UL94V-0 • Yellow color with black weather-strip • Fastening cuffs at both ends
";}}}}}}- 1
- 2