a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:92:"Graco Pump Packing Repair Kit- For Graco Airless Sprayers EM400 (226400) and EM480 (217480).";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4424:"<div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets"><div class="content-builder"><div class="cp-news-grid-style-4"><div class="row"><div class="col-md-12"><div class="cb-text"><div class="content nobullets">PMC 30" SS Unheated Whip</div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div><div class="clearfix"></div></div></div></div></div><div class="clearfix"></div></div><div class="clearfix"></div>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4160:"<p><b>DC-315 Intumescent Coating Thermal Barrier, 5 Gallons, White </b><i>(Please call customer service at 706-557-1400 for volume pricing) (if you order 36 buckets (a pallet) you will receive free shipping)</i><br></p><p>This fire barrier spray foam is an intumescent coating applied over Spray Polyurethane Foam (SPF) to achieve a “15 Minute Alternative to Thermal Barrier” and “5 Minute Ignition Barrier.” This 5 gallon spray foam insulation is compliant to IBC & IRC codes; 3rd party inspected and listed by Warnock Hersey ( WN-20947), and meets the requirements of the AC456 criteria recently updated in AC377. DC315 has more than 200 tests worldwide over a wide variety of foams. It has one of the best coverage rates for foam at 115 sq ft/gallon, making it very cost efficient.</p><div>All surfaces to be coated must be clean, cured, firm, dry and free of dust, dirt, oil, wax, grease, mildew, and efflorescence. The quality of any application is only as good as the surface preparation that precedes the application. Our coating has excellent bonding characteristics and will adhere to most sound, clean, foam surfaces. Verify that the surface of the foam is free of gouges, holes, and exposed cells. Also verify the surface is stable, and not crumbling or deteriorated. If any such defects are found make sure to repair them prior to proceeding.</div><div> </div><div>This spray on thermal barrier must be thoroughly mixed before application. Failure to do so will seriously compromise the coating's ability to perform. It is recommended to perform mechanical stirring with a high speed drill and a paddle appropriate for the size container you are working from. Contents should be stirred from the bottom up making sure to scrape the bottom and sides with a paint stick as you go. Contents should be stirred to a creamy consistency with no lumps. Continue mixing for 4-5 minutes per 5 gallon pail. Thinning is usually not needed. If DC 315 has been exposed to high heat, water may evaporate from the plastic 5 gallon container. If the paint level is below 3 inches from the top of the container, add enough water to bring the level back up to within 3 inches from the top in order to ensure proper consistency.</div><div> </div><div>This 5 gallon spray foam insulation is best applied with an airless sprayer to achieve a more consistent mil thickness. In challenging areas where an airless sprayer is not practical, DC 315 can be applied by brush or roller Spraying DC 315 for Maximum Yield: If this is the first time using DC 315 we suggest testing a pre-measured area to get a feel for spraying and yield. Example, if the job requires 20 wet mils or 80 sq. ft. per gallon, then a 5 gallon pail would cover 400 sq. ft. Measure out one or two 400 sq. ft. sections using pieces of tape, thumbtacks, or canned spray paint. Use just enough to outline the area you intend to apply DC 315. We suggest spraying inside the outlined area and taking wet film thickness measurements, with a wet film gauge across the area, to get a feel for maximum yield.</div><div><br></div><div>Building Code Fire Performance Requirements for Spray Polyurethane Foam (SPF): The International Building Code (IBC) mandates that SPF be separated from the interior of the building by a 15-minute thermal barrier, or other approved covering. DC315 Carries <a href="https://painttoprotect.com/wp-content/uploads/2020/11/ER_0499_Evaluation.pdf" target="_blank" rel="noopener noreferrer">IAMPO ER-0499</a> and<a href="https://icc-es.org/report-listing/esr-3702/"> ICC- ESR 3702</a> Evaluation Reports confirming that DC315 meets IBC and IRC Code Requirements as an alternative thermal barrier for SPF. DC315 has also been tested as an ignition barrier under AC 377 Appendix X for use in attics and crawlspaces. DC315 is UL Certified <a href="https://painttoprotect.com/wp-content/uploads/2020/02/R40016-Certificate-of-Compliance.pdf">R40016</a> for use in exterior wall systems and has been tested in accordance with NFPA 285 when applied over spray foam on the exterior side of buildings clad with architectural metal finish panels.</div>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4244:"<p><b>DC-315 Intumescent Coating Thermal Barrier, 5 Gallons, Ice Gray-</b><b>We do not stock this color-store pickup is not allowed</b><i>(Please call customer service at 706-557-1400 for volume pricing) </i><i>(if you order 36 buckets (a pallet) you will receive free shipping)</i></p><p><b></b></p><p>This fire barrier spray foam is an intumescent coating applied over Spray Polyurethane Foam (SPF) to achieve a “15 Minute Alternative to Thermal Barrier” and “5 Minute Ignition Barrier.” This 5 gallon spray foam insulation is compliant to IBC & IRC codes; 3rd party inspected and listed by Warnock Hersey ( WN-20947), and meets the requirements of the AC456 criteria recently updated in AC377. DC315 has more than 200 tests worldwide over a wide variety of foams. It has one of the best coverage rates for foam at 115 sq ft/gallon, making it very cost efficient.</p><div>All surfaces to be coated must be clean, cured, firm, dry and free of dust, dirt, oil, wax, grease, mildew, and efflorescence. The quality of any application is only as good as the surface preparation that precedes the application. Our coating has excellent bonding characteristics and will adhere to most sound, clean, foam surfaces. Verify that the surface of the foam is free of gouges, holes, and exposed cells. Also verify the surface is stable, and not crumbling or deteriorated. If any such defects are found make sure to repair them prior to proceeding.</div><div> </div><div>This spray on thermal barrier must be thoroughly mixed before application. Failure to do so will seriously compromise the coating's ability to perform. It is recommended to perform mechanical stirring with a high speed drill and a paddle appropriate for the size container you are working from. Contents should be stirred from the bottom up making sure to scrape the bottom and sides with a paint stick as you go. Contents should be stirred to a creamy consistency with no lumps. Continue mixing for 4-5 minutes per 5 gallon pail. Thinning is usually not needed. If DC 315 has been exposed to high heat, water may evaporate from the plastic 5 gallon container. If the paint level is below 3 inches from the top of the container, add enough water to bring the level back up to within 3 inches from the top in order to ensure proper consistency.</div><div> </div><div>This 5 gallon spray foam insulation is best applied with an airless sprayer to achieve a more consistent mil thickness. In challenging areas where an airless sprayer is not practical, DC 315 can be applied by brush or roller Spraying DC 315 for Maximum Yield: If this is the first time using DC 315 we suggest testing a pre-measured area to get a feel for spraying and yield. Example, if the job requires 20 wet mils or 80 sq. ft. per gallon, then a 5 gallon pail would cover 400 sq. ft. Measure out one or two 400 sq. ft. sections using pieces of tape, thumbtacks, or canned spray paint. Use just enough to outline the area you intend to apply DC 315. We suggest spraying inside the outlined area and taking wet film thickness measurements, with a wet film gauge across the area, to get a feel for maximum yield.</div><div><br></div><div>Building Code Fire Performance Requirements for Spray Polyurethane Foam (SPF): The International Building Code (IBC) mandates that SPF be separated from the interior of the building by a 15-minute thermal barrier, or other approved covering. DC315 Carries <a href="https://painttoprotect.com/wp-content/uploads/2020/11/ER_0499_Evaluation.pdf" target="_blank" rel="noopener noreferrer">IAMPO ER-0499</a> and<a href="https://icc-es.org/report-listing/esr-3702/"> ICC- ESR 3702</a> Evaluation Reports confirming that DC315 meets IBC and IRC Code Requirements as an alternative thermal barrier for SPF. DC315 has also been tested as an ignition barrier under AC 377 Appendix X for use in attics and crawlspaces. DC315 is UL Certified <a href="https://painttoprotect.com/wp-content/uploads/2020/02/R40016-Certificate-of-Compliance.pdf">R40016</a> for use in exterior wall systems and has been tested in accordance with NFPA 285 when applied over spray foam on the exterior side of buildings clad with architectural metal finish panels.</div>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:4232:"<p><b>DC-315 Intumescent Coating Thermal Barrier, 5 Gallons, Dark Gray -We do not stock this color-store pickup is not allowed </b><i>(Please call customer service at 706-557-1400 for volume pricing) </i><i>(if you order 36 buckets (a pallet) you will receive free shipping)</i><br></p><p>This fire barrier spray foam is an intumescent coating applied over Spray Polyurethane Foam (SPF) to achieve a “15 Minute Alternative to Thermal Barrier” and “5 Minute Ignition Barrier.” This 5 gallon spray foam insulation is compliant to IBC & IRC codes; 3rd party inspected and listed by Warnock Hersey ( WN-20947), and meets the requirements of the AC456 criteria recently updated in AC377. DC315 has more than 200 tests worldwide over a wide variety of foams. It has one of the best coverage rates for foam at 115 sq ft/gallon, making it very cost efficient.</p><div>All surfaces to be coated must be clean, cured, firm, dry and free of dust, dirt, oil, wax, grease, mildew, and efflorescence. The quality of any application is only as good as the surface preparation that precedes the application. Our coating has excellent bonding characteristics and will adhere to most sound, clean, foam surfaces. Verify that the surface of the foam is free of gouges, holes, and exposed cells. Also verify the surface is stable, and not crumbling or deteriorated. If any such defects are found make sure to repair them prior to proceeding.</div><div> </div><div>This spray on thermal barrier must be thoroughly mixed before application. Failure to do so will seriously compromise the coating's ability to perform. It is recommended to perform mechanical stirring with a high speed drill and a paddle appropriate for the size container you are working from. Contents should be stirred from the bottom up making sure to scrape the bottom and sides with a paint stick as you go. Contents should be stirred to a creamy consistency with no lumps. Continue mixing for 4-5 minutes per 5 gallon pail. Thinning is usually not needed. If DC 315 has been exposed to high heat, water may evaporate from the plastic 5 gallon container. If the paint level is below 3 inches from the top of the container, add enough water to bring the level back up to within 3 inches from the top in order to ensure proper consistency.</div><div> </div><div>This 5 gallon spray foam insulation is best applied with an airless sprayer to achieve a more consistent mil thickness. In challenging areas where an airless sprayer is not practical, DC 315 can be applied by brush or roller Spraying DC 315 for Maximum Yield: If this is the first time using DC 315 we suggest testing a pre-measured area to get a feel for spraying and yield. Example, if the job requires 20 wet mils or 80 sq. ft. per gallon, then a 5 gallon pail would cover 400 sq. ft. Measure out one or two 400 sq. ft. sections using pieces of tape, thumbtacks, or canned spray paint. Use just enough to outline the area you intend to apply DC 315. We suggest spraying inside the outlined area and taking wet film thickness measurements, with a wet film gauge across the area, to get a feel for maximum yield.</div><div><br></div><div>Building Code Fire Performance Requirements for Spray Polyurethane Foam (SPF): The International Building Code (IBC) mandates that SPF be separated from the interior of the building by a 15-minute thermal barrier, or other approved covering. DC315 Carries <a href="https://painttoprotect.com/wp-content/uploads/2020/11/ER_0499_Evaluation.pdf" target="_blank" rel="noopener noreferrer">IAMPO ER-0499</a> and<a href="https://icc-es.org/report-listing/esr-3702/"> ICC- ESR 3702</a> Evaluation Reports confirming that DC315 meets IBC and IRC Code Requirements as an alternative thermal barrier for SPF. DC315 has also been tested as an ignition barrier under AC 377 Appendix X for use in attics and crawlspaces. DC315 is UL Certified <a href="https://painttoprotect.com/wp-content/uploads/2020/02/R40016-Certificate-of-Compliance.pdf">R40016</a> for use in exterior wall systems and has been tested in accordance with NFPA 285 when applied over spray foam on the exterior side of buildings clad with architectural metal finish panels.</div>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:777:"<b>Flame Control Intumescent Coating 60-60A, 5 gallons, White <span class="wysiwyg-color-red">(lead time per the manufacturer is 3-4 weeks at this time)</span></b><div><br></div><div> Flame Control 60-60A is a 15-Minute Thermal Barrier for Spray Polyurethane Foam Insulation. A water-based, low VOC, intumescent latex paint, 60-60A has been tested to NFPA 286 test standards and has been approved for use on spray foam insulation. Flame Control 60-60A is suitable for use in inhabited (occupied) spaces where spray foam insulation must be coated with a thermal barrier per the IBC. 60-60A should be applied in a single coat, and does not require a primer. These features make 60-60A the easiest to use, fastest to apply thermal barrier available on the market.</div>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:1918:"<p>Allegro Replacement High Pressure Full Face Mask Supplied Air Respirator</p><p>This comfortable full mask offers high pressure continuous flow protection with a unique over the shoulder hose design and an adjustable belt holds the hose and airflow valve out of the way. NIOSH approved (TC-19C-437)</p><p><b>LENS: </b></p><p></p><p>• High impact polycarbonate (meets ANSI Z87.1) </p><p>• Wide field of vision with distortion-free replaceable lens </p><p>• Anti-fog and anti-scratch coatings </p><p>• Optional lens peel-offs available (PN 9901-25)</p><p></p><p><b>SUSPENSION: </b></p><p>• Non-slip durable rubber five-point harness w/ mesh hairnet </p><p>• Fits under hard hats</p><p> • Unique adjustable buckle system to lock in place </p><p><b>SEAL: </b></p><p>• Hypoallergenic and chemical/Ozone resistant </p><p>• Durable silicone rubber maintains shape while in storage </p><p>• Comfortable even in extreme heat and cold environments </p><p>• Double sealing flange and deep chin pocket for better face to mask seal</p><p><b>EXHALATION VALVE: </b></p><p>• Large diameter contoured exhalation valve design for minimal breathing resistance </p><p>• Easily accessible for fast replacement and cleaning </p><p>• Removable cover protects the exhalation valve form dirt, paint spray, and from freezing</p><p><b>DOWNTUBE & BELT ASSEMBLY: </b></p><p>• 90° elbow allows it to be directed over the shoulder and out of the way </p><p>• Corrugated flexible and lightweight material for greater comfort and less fatigue </p><p>• Three options available: o Flow Control Valve (20-50 psi) (1.38-3.45 bar) o Personal Cooler (50-85 psi) (3.45-5.86 bar) o Temp Controller (55-105 psi) (3.79-7.24 bar) </p><p>• Low profile nylon adjustable waist belt (included with high pressure controllers) </p><p>• Plastic clip to restrain airline hose from pulling on the face piece </p>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:577:"No-Burn ThB Spray Seal Intumescent Coating, 5 gallons, Light Gray<div><br></div><div>No-Burn ThB Spray Seal is an advanced intumescent coating designed for application over both open and closed cell spray polyurethane foam. It serves as a Class II vapor retarder, thermal barrier, and ignition barrier in a single application. This resilient coating can withstand UV exposure and weather conditions for up to 6 months. Additionally, ThB Spray Seal is fully compliant with the International Building Code and International Residential Code.</div><div><br></div><div></div>";}}}}}}
a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:67:"Turbo Cutz Main Large Rollers Replacement for inner (larger)-Qty: 2";}}}}}}
