Soil Probe Kit- (Reach out to your local sales rep or call customer service at 706-557-1400 for pricing)

This probes injection kit is capable of reaching depths of up to 20 feet and can be configured as three separate 7.5-foot injection rods. It features a quick-disconnect system with button-head fittings and includes a direct-to-pipe valve attachment for efficient and secure operation.

kit includes:

•  (5) -JG-NoShooter
•  (5)-JG Perforated 250MM
•  (6)-JG-Connect 1000
•  (8)-JG-Connector-14
•  (5)-NG-F 1/4
•  (1)-CPF
•  (2)-CPF Rebuild Kits
•  (1)-Flexible Injection Valve 1K
•  (1)-Solo Injection Valve 1K

Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can

Extra powerful, time-saving formula cleans molds and tools with ease. Completely removes cured polyurethane, mold release, and other build-up from tooling, molds, and machinery. Use only on steel, aluminum and other metal tooling

Directions for Use:

Recommended Procedure:

Wear rubber gloves and safety goggles to protect skin and eyes. Saturate the mold build-up with B-505 and allow to soak for about 8-10 hours. Soaking time may vary depending on the degree of build-up and temperature of mold. Allow B-505 to soak in until build-up easily wipes away with a rag or soft parts cleaning brush. Difficult areas may require a second application, 24hours of soaking, or scrubbing with soft cleaning brush or rag. Remove excess cleaner with a rag or allow to airdry. B-505 is a strong cleaner which may be harmful to certain plastics, paints, or other solvent sensitive materials. Always test for compatibility before using. Immediately after use, let B-505 evaporate from cloths or other applicators in a well-ventilated area, away from sources of ignition. Collect and dispose of material, rags, and applicators in metal containers in accordance with all local, state, and federal regulations.

Storage and Handling:

Keep container tightly closed when not in use. Store in a cool, dry, well-ventilated area away from all sources of ignition. Avoid prolonged or repeated breathing of vapor. Avoid prolonged or repeated contact with skin. Use with adequate ventilation. Do not use near ignition sources. Consult SDS for additional safety information.

Used 16' Core Series PMC PH-2, 18kw Gas Generator Powered Spray Rig

Please see the detailed quote below: Call the office at 706-557-1400 for any further questions.

Used Hertz HBD 5 Air Compressor, 230 Volt, 7.5 hp-SN: VD015363

•  3 Phase
•  230 Volt
•  7.5hp
•  16 1/2 Hours
•  Manufactured date: 04/21
•  Tested date: 10/28/25

All sales on Used Spray Foam Equipment are final. No Refunds or Exchanges!

Used Hertz HBD 5 Air Compressor, 230 Volt, 7.5 hp-SN: VD019036

•  3 Phase
•  230 Volt
•  7.5hp
•  19 3/4 Hours
•  Manufactured date: 09/21
•  Tested date: 10/28/25

All sales on Used Spray Foam Equipment are final. No Refunds or Exchanges!

Used Hertz HBD 5 Air Compressor, 230 Volt, 7.5 hp-SN: VD019037

•  3 Phase
•  230 Volt
•  7.5hp
•  16 1/2 Hours
•  Manufactured date: 09/21
•  Tested date: 10/28/25

All sales on Used Spray Foam Equipment are final. No Refunds or Exchanges!

Used PMC PH-2 Diesel Powered Box Truck Spray Rig

Please see the detailed quote below: Call the office at 706-557-1400 for any further questions.